I'm looking to get my fenders rolled so I can fit oem 19s on my sedan.. Does anyone know of a place where I can get them rolled cheap?

 

well the oem's will fit without having to have ur fenders rolled. especially if ur on stock suspension...

i got mine rolled at billet design off of copans road

 

I would do it your self. It is easy and only takes about 20 minutes.

 

JR electronics on Bird Rd and around 97th ave.

 

Every other person I have talked to says the 19s will rub on a sedan and you have to roll/shave them, and I am waay to scared to do it myself, I dont really understand the DIY and I dont want to chip the paint so I would much rather pay someone to do a good safe job.

 

cb wheels by the falls was goin to charge me 50 per side so 100 total

 

how much?

 

that place is still in business? Just about every decent audio manufacturer would get lured by their sales volume. Once the manufactuer realized that all JR would do is ***** out product, the manufacturer would pull the line from them. I know it happened with Soundstream, and then a couple years later JL Audio pull their line from them too.

they have always been a shady operation. be wary of taking anything to them.

 

IIRC they charged me $40 per fender.

 

Yeah they are still in business. They installed my amp and speaker box as well as my alarm and passport SR7. I never really had a problem with them.

 

JR = shady..shady ...shady ....mmmmm

 

bump. OP, did you finally get your fenders rolled? I'm looking to get mine rolled also, and JR has already given me a bad impression

from all the 'shady' comments. Any other reputable shops you guys would recommend (that makes sure to not crack the paint!)? *near miami*

 

Sabal Chase
12019 SW 117th Ct.
Miami, FL 33186
(305)255-5997

Ask for Randy.

Got one small paint chip but you have to get under the car to see it, anyway I put some touch up paint and done!

They've got the tool and heated the lip but due to the amount of rolling they had to do (10.5 wheel, 285 tire & +18 offset) it was unavoidable to get a paint chip.

Charged $40 per side, also checked the alignment and brought up to specs.

I can now enjoy my ride!!

Laterzzz...DOMO

 

I would probably go with Sabal Chase than the others ones on here. I've gotten some work from them in the past and they've done a great job.