FS: Volk GT-V F 19x9.5+30, R 19x10.5+24, clears Brembos, center caps/valves
sold!!Volk GT-V F 19x9.5+30, R 19x10.5+24, clears Brembos, center caps/valves
SOLD, mods please close thread
Hello,
The Fronts are 19" x 9.5" with +30 offset and Rears are 19"x 10.5" with +24 offset, the lug pattern is 5x114.3........I had them on my 04 with Brembos and they cleared without any problems (same as in my avatar)
These rims have curb damage as describes below, nothing that cannot be easily fixed in a rim repair shop, I went over a small center divider (lesson dont turn VDC off.....ever)
I have gotten two quotes from local repair places, ranging in 500-600 all inclusive(tax, shop fee etc) for all four rims.
Two wheels, 1F and 1R have minor curb rashes around the front lip of the rim
One Front rim has TWO 2-3 inch bends on the back side of the rim and curb rashes around the front (this is the worst one)
One Rear rim has one 2 inch bend on the front, and very minor curb rashes
The rims come with 4 VOLK GT high type center caps, and I have valves as well but I think only 1 is good since the little pins are missing from the rest the tires have been dismounted for easy transport and repair.....
There are 40+ pics at flickr, the permissions on these are all public, so if guys cannot see the entire set let me know...Thanks
Paypal is accepted and I am selling the rims as is, thanks for looking
Asking $900 shipped (includes paypal fees), can be picked up in Atlanta Metro area to save on shipping cost
http://www.flickr.com/photos/50011705@N07/4900183026
http://www.flickr.com/photos/50011705@N07/4900183034
http://www.flickr.com/photos/50011705@N07/4899679887
http://www.flickr.com/photos/50011705@N07/4899882663
http://www.flickr.com/photos/50011705@N07/4899679913
Hello,
The Fronts are 19" x 9.5" with +30 offset and Rears are 19"x 10.5" with +24 offset, the lug pattern is 5x114.3........I had them on my 04 with Brembos and they cleared without any problems (same as in my avatar)
These rims have curb damage as describes below, nothing that cannot be easily fixed in a rim repair shop, I went over a small center divider (lesson dont turn VDC off.....ever)
I have gotten two quotes from local repair places, ranging in 500-600 all inclusive(tax, shop fee etc) for all four rims.
Two wheels, 1F and 1R have minor curb rashes around the front lip of the rim
One Front rim has TWO 2-3 inch bends on the back side of the rim and curb rashes around the front (this is the worst one)
One Rear rim has one 2 inch bend on the front, and very minor curb rashes
The rims come with 4 VOLK GT high type center caps, and I have valves as well but I think only 1 is good since the little pins are missing from the rest the tires have been dismounted for easy transport and repair.....
There are 40+ pics at flickr, the permissions on these are all public, so if guys cannot see the entire set let me know...Thanks
Paypal is accepted and I am selling the rims as is, thanks for looking
Asking $900 shipped (includes paypal fees), can be picked up in Atlanta Metro area to save on shipping cost
http://www.flickr.com/photos/50011705@N07/4900183026
http://www.flickr.com/photos/50011705@N07/4900183034
http://www.flickr.com/photos/50011705@N07/4899679887
http://www.flickr.com/photos/50011705@N07/4899882663
http://www.flickr.com/photos/50011705@N07/4899679913
Last edited by mastee2; Sep 11, 2010 at 08:10 PM. Reason: sold
FYI,
Guys please check out the pictures of damaged rims on the web and how these shops can repair them, mine are not that bad, the lip needs to be straightened upward maybe 1/2 inch......but most importantly the metal has NO splits at any place..............
BUT I can take it to a local shop, I showed them pics and the shop did not think that it was any problem, one more thing people can check on is to just buy a new outer piece for the FR Left rim (which is the bad one) and just have the rest repaired.....
Guys please check out the pictures of damaged rims on the web and how these shops can repair them, mine are not that bad, the lip needs to be straightened upward maybe 1/2 inch......but most importantly the metal has NO splits at any place..............
BUT I can take it to a local shop, I showed them pics and the shop did not think that it was any problem, one more thing people can check on is to just buy a new outer piece for the FR Left rim (which is the bad one) and just have the rest repaired.....
update here are the pics of the included metal valve stems, only one has the core intact, cheap to replace...Thanks
http://www.flickr.com/photos/50011705@N07/4910459501/
http://www.flickr.com/photos/50011705@N07/4911060272/
http://www.flickr.com/photos/50011705@N07/4910459501/
http://www.flickr.com/photos/50011705@N07/4911060272/
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Machine Head
19 Inch
3
Mar 16, 2016 08:55 PM
JG_G35
19 Inch
14
Sep 19, 2015 09:04 PM




