Tein S-techs (G)

 

Hey everyone, just need some suggestions and tips on finally lowering my cars, I'm currently on OEM 19 rays with 27mm wheel spacers all around, I was initially planning on going 350z h tech or g35 h tech, would I be able to pull off the 350z h tech's without camber kit? How about g35 S tech? Thanks a bunch

 

with just the 350z H-techs u should be ok on camber, however u'll most likely want to do a rear spring mount mod just to level the car alittle. My camber was about -2.5 which i didnt like and got the rear camber kit, now its in factory spec -1.0...I did the front also, not that i really needed it..u should be good on the fronts.

 

Z S-Tech, no springmount, 25mm spacers all around.

 

here's a better pic of my 350z s-techs w/ rear spring mount mod

 

Did you do the spring mount mod too..hows the ride with them springs?

 

This drop is perfect for me. Of course I would like to go a little lower, but, for my daily commute this has been great so far.

Before


Finally low...350Z Tein S-Tech Springs on stock shocks (no springmount mod)

Rear Fender Clearance

Front Fender Clearance

 

How long since you installed the Stechs? (have they settled yet is what I'm gettin at )

 

I bought them used already mounted on the front shocks. They've been on for about 3 weeks since these pictures and haven't dropped any more.

 

Meh...updates with new wheels lol

350z H-techs with Spring mount mod and rear camber kit.

New Shoes







Couple for the road!

 

I love winnings, probably my favorite wheel.

 

i put s tech on my 04 g35x on stock wheels and my wheels are starting to go in.


why does this happen and what do i need to do ?

 

go in how? at the top or like toe'ing in (front or rear)

really either case the answer is alignment...if they cannot align your car as is then you will likely need a camber kit!

 

Z s-techs/Tokico HPs with rear spring mount mod.

 

^^looks great irishsig! those big tires scare me tho lol how they working out for ya?

and where did you buy your rear diffuser?