[DFW] What have you done to your G Today?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Nov 5, 2011 | 02:32 PM
  #10516  
TheJanitor6203's Avatar
Registered User
iTrader: (12)
Joined: Oct 2011
Posts: 605
Likes: 44
From: Lakewood, WA.. its temporary
Ok, I'm getting a better idea of what this is all about. I've been all over these forums for the past 2 days trying to understand this, lol. With everyone's advice and checking out the Revup website, I think I know what is going on now. How much do think this should cost at PRT? Sounds like I need the Revup Standard package which is $500 plus ??? for PRT to do there part?
 
Reply
Old Nov 5, 2011 | 02:44 PM
  #10517  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by TheJanitor6203
Ok, I'm getting a better idea of what this is all about. I've been all over these forums for the past 2 days trying to understand this, lol. With everyone's advice and checking out the Revup website, I think I know what is going on now. How much do think this should cost at PRT? Sounds like I need the Revup Standard package which is $500 plus ??? for PRT to do there part?
well Steve is a licensed tuner so you can buy a license from him I believe and have him give you a tune. not 100% Certain but you could try.
 
Reply
Old Nov 5, 2011 | 02:57 PM
  #10518  
TheJanitor6203's Avatar
Registered User
iTrader: (12)
Joined: Oct 2011
Posts: 605
Likes: 44
From: Lakewood, WA.. its temporary
Thanks for all the info! I'll let ya'll know how it turns out. I wasn't expecting to have to spend so much, so it may be a while before I do this after all.
 
Reply
Old Nov 5, 2011 | 03:37 PM
  #10519  
TheJanitor6203's Avatar
Registered User
iTrader: (12)
Joined: Oct 2011
Posts: 605
Likes: 44
From: Lakewood, WA.. its temporary
Ok, I've come to the realization that I can't afford the tune after all.

So new question.. I can install the these parts (plenum spacer, HFC's, Borla catback) without the tuneand still see some power gains and everything should be fine right or should I hold off on the plenum spacer until I can afford the tune?
 
Reply
Old Nov 5, 2011 | 03:42 PM
  #10520  
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member

I think Steve charges 675 out the door
 
Reply
Old Nov 5, 2011 | 04:00 PM
  #10521  
TheJanitor6203's Avatar
Registered User
iTrader: (12)
Joined: Oct 2011
Posts: 605
Likes: 44
From: Lakewood, WA.. its temporary
Originally Posted by JaE35
I think Steve charges 675 out the door
That's not as bad as I was thinking but it's still much higher than I was expecting before I realized I had to purchse the UpRev license as well. I just bought my car and the agreement between me and the wife was that I would only do the exhaust system until the car is paid off. I told her it was going to cost about $1,500 but since I'm buying all used parts and installing them myself, after buying the cats and exhaust, I had only spent $750 so I figured I'd go ahead and take advantage of my $1,500 budget But with the purchase of the spacer, I'm at $950.. If it really is only going to be $675 total, I might just go a little over my budget and live with an angry wife for a few days.
 
Reply
Old Nov 5, 2011 | 04:35 PM
  #10522  
BlueBOB's Avatar
Registered User
15 Year Member
iTrader: (7)
Joined: Nov 2006
Posts: 4,182
Likes: 61
From: Dallas, TX
Adding those mods without a tune won't hurt. A tune just allows you to take full advantage of the mods. The gains are different per car. With only those three mods, the value may not be as much, but to each their own. There are many out there with many more mods and no tune. With a naturally aspirated motor, the NEED for a tune is minimal, but the results of one arent bad.
 
Reply
Old Nov 5, 2011 | 04:59 PM
  #10523  
AzuMaster's Avatar
Registered User
Joined: Oct 2009
Posts: 1,176
Likes: 130
From: Waldorf, Maryland
Abt to put my stock wheels back on, remove my blacked out bumper lights & put back yellow, removing Gialla drill & returning stock grill, debadging trunk from Skyline and removing GTR overlays off of tail lights. Abt to sell my baby!!
 
Reply
Old Nov 5, 2011 | 05:04 PM
  #10524  
gmotion04's Avatar
Registered User
iTrader: (16)
Joined: Oct 2008
Posts: 1,890
Likes: 32
From: Texas
Originally Posted by Deemo
is it the inven roof spoiler
nope oem
 
Reply
Old Nov 5, 2011 | 05:04 PM
  #10525  
firefox's Avatar
Registered User
iTrader: (8)
Joined: Feb 2004
Posts: 591
Likes: 5
From: McKinney, Texas
carbon fiber vinyl

The clear coat on my roof was peeling off so I decided to sand it down and put vinyl on it.
 
Attached Thumbnails [DFW] What have you done to your G Today?-wp_000254-large-.jpg   [DFW] What have you done to your G Today?-wp_000288-large-.jpg  
Reply
Old Nov 5, 2011 | 05:14 PM
  #10526  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by AzuMaster
Abt to put my stock wheels back on, remove my blacked out bumper lights & put back yellow, removing Gialla drill & returning stock grill, debadging trunk from Skyline and removing GTR overlays off of tail lights. Abt to sell my baby!!
you move to Dallas, Texas?? where you located??
 
Reply
Old Nov 5, 2011 | 05:15 PM
  #10527  
gmotion04's Avatar
Registered User
iTrader: (16)
Joined: Oct 2008
Posts: 1,890
Likes: 32
From: Texas
hey chris got my bushings in so let me know when you are free i need to go over to new image autosports in garland to pick up my pioneer 4300
 
Reply
Old Nov 5, 2011 | 05:32 PM
  #10528  
BlueBOB's Avatar
Registered User
15 Year Member
iTrader: (7)
Joined: Nov 2006
Posts: 4,182
Likes: 61
From: Dallas, TX
Originally Posted by firefox
The clear coat on my roof was peeling off so I decided to sand it down and put vinyl on it.
Long time no see/hear sir! How are ya? Hope all is well.
 
Reply
Old Nov 5, 2011 | 07:19 PM
  #10529  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by gmotion04
hey chris got my bushings in so let me know when you are free i need to go over to new image autosports in garland to pick up my pioneer 4300
the inner LCA's correct? or which setup?? whiteline?
 
Reply
Old Nov 5, 2011 | 07:40 PM
  #10530  
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member

brembos on, new door on, and trunk installed
 
Reply


You have already rated this thread Rating: Thread Rating: 1 votes, 1.00 average.


All times are GMT -4. The time now is 12:14 PM.