WTB: OEM Undertray & Fender Liner

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 20, 2011 | 03:03 PM
  #1  
sindaddy's Avatar
Thread Starter
|
Registered User
Joined: May 2008
Posts: 34
Likes: 0
From: SF Bay Area
OEM Undertray & Fender Liner

WTB OEM Undertray and Fender liner for 06 G35 Coupe.
 
Reply
Old Jul 20, 2011 | 04:00 PM
  #2  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
which fender liner do you need? I have a fender liner setup for a coupe..not brand new..slightly used.
 
Reply
Old Jul 20, 2011 | 04:47 PM
  #3  
sindaddy's Avatar
Thread Starter
|
Registered User
Joined: May 2008
Posts: 34
Likes: 0
From: SF Bay Area
front portion for both left and right.
 
Reply
Old Jul 20, 2011 | 04:48 PM
  #4  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by sindaddy
front portion for both left and right.
i will take a pic of what I got tonight and you let me know.
 
Reply
Old Jul 21, 2011 | 10:52 PM
  #5  
purgatory13z's Avatar
Registered User
Joined: May 2010
Posts: 7
Likes: 0
undertray

Don't know if it's against etiquette to do so, but I'm going to piggyback and say I need one of those undertrays too, if it means the underengine one. NOREAST in CT
 
Reply
Old Jul 22, 2011 | 01:11 AM
  #6  
sindaddy's Avatar
Thread Starter
|
Registered User
Joined: May 2008
Posts: 34
Likes: 0
From: SF Bay Area
i just called the stealership and they quoted me $47.32 per side of the fender well liner, and $149.64 for the undertray... which is a good deal compare to the cheap plastic ones on ebay.
 
Reply
Old Jul 22, 2011 | 01:15 AM
  #7  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
Originally Posted by sindaddy
i just called the stealership and they quoted me $47.32 per side of the fender well liner, and $149.64 for the undertray... which is a good deal compare to the cheap plastic ones on ebay.
Your oem one is plastic...you can buy a metal one from tollboothwilley for like 50 bucks more
 
Reply

Trending Topics

Old Jul 22, 2011 | 01:19 AM
  #8  
sindaddy's Avatar
Thread Starter
|
Registered User
Joined: May 2008
Posts: 34
Likes: 0
From: SF Bay Area
would the metal one shred into pieces if i ran over something? sharp particles = not good.
 
Reply
Old Jul 22, 2011 | 01:22 AM
  #9  
g35man04's Avatar
CLUB MODERATOR
iTrader: (280)
Joined: Nov 2006
Posts: 12,976
Likes: 152
From: Denton, Texas
I have had mine for 2 years...have been lowered for 3-4 years now...also ran arc one for awhile and never once have I shredded it.its been abused to.Hell also. The nice thing is that its 2 piece. Also has a door to.change the oil
 
Reply
Old Jul 22, 2011 | 02:09 AM
  #10  
Eye Eat Ketchup's Avatar
Registered User
iTrader: (5)
Joined: Jun 2010
Posts: 307
Likes: 9
From: Santa Clarita, CA
which undertray has a door to change the oil? mine just straight up ripped apart when I ran over a piece of tire on the freeway going 85
 
Reply
Old Jul 22, 2011 | 09:55 AM
  #11  
biggie's Avatar
Registered User
iTrader: (3)
Joined: May 2009
Posts: 33
Likes: 0
From: Clemmons, NC
The one from Tollbooth is very good Alum piece, very happy with it. Having the Alum one is better than the plastic no matter what you run over. Makes oil changes MUCH easier with the 2 bolt access door.
 
Reply
Old Jul 22, 2011 | 11:28 AM
  #12  
purgatory13z's Avatar
Registered User
Joined: May 2010
Posts: 7
Likes: 0
OOOO! I love running over things! haha nah, but that sounds like a good alternative. Only problem is that I have an aftermarket nismo bumper, and I need a new splitter as weil.... I'm going to look for Tollbooth now though, I'll always take metal over plastic where scrape protection comes in.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jsimonk
General Media Share
17
Dec 22, 2023 03:49 PM
helalo
The G-Spot
7
Aug 10, 2015 08:21 AM
st33zygill
Exterior - Body Parts
3
Jul 29, 2015 10:05 PM
Buggzb86
Drivetrain
0
Jul 25, 2015 11:22 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:13 AM.