FS: Garage clean out ARC/Cosworth/Ferrea

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 8, 2012 | 06:09 PM
  #1  
Sylvan lake V35's Avatar
Thread Starter
|
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
Garage clean out ARC/Cosworth/Ferrea

Not much left.


Keep in mind all prices are USD shipping to Canada and lower 48 is included as well as PP fees. The price listed is what you pay, I have shipped to the US many times and in most cases it is going to cost me at least $20 for shipping even small items I factored this into the price.


All parts what is pictured is what you get, anything included is in the picture


****More parts added at the bottom***







ARC Ver I what is pictured is included $350 shipped paypal fees included to Canada and lower 48



Ferrea Titanium Valve springs Reduced $100 less than 5,000miles I swapped to JWT C2 cams and he talked me into using his springs although I am pretty sure these are better. If your ever thinking of upgrading cams...you need springs






ZeeToys discontinued polished caps Reduced $100, I paid more than that for them the weird flowers on them are a reflection of our roof I never noticed it until I had put the camera and parts away


Picture of polished caps on Marty's car

 

Last edited by Sylvan lake V35; Feb 8, 2012 at 12:19 AM.
Reply
Old Jan 8, 2012 | 06:28 PM
  #2  
Equipped4dr's Avatar
Registered User
iTrader: (32)
Joined: Sep 2008
Posts: 2,470
Likes: 55
From: South Gate, soCAL
love the engine bay and car ofcourse. GLWS
 
Reply
Old Jan 8, 2012 | 06:30 PM
  #3  
Infiniti_Energy's Avatar
Registered User
iTrader: (40)
Joined: Oct 2009
Posts: 503
Likes: 0
From: Chicago
Awesome parts! You must be pretty baller status if you can just forget about parts like this in your garage haha! GLWS!
 
Reply
Old Jan 8, 2012 | 06:58 PM
  #4  
Sylvan lake V35's Avatar
Thread Starter
|
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
Originally Posted by Infiniti_Energy
Awesome parts! You must be pretty baller status if you can just forget about parts like this in your garage haha! GLWS!
I seriously hate selling parts so bad. A guy put up a WTB thread for a discontinued Greddy shift **** I have sitting in my garage i PMed letting him know I had an un-used one sitting in my garage he wanted it for pretty much what shipping would cost if i have to take the time to box something up and go drive to the post office and stand in line to ship it to make $10 maybe I have too much money but that is alot of screwing around for $10. I hate dealing with tire kickers and low ballers so these parts have been sitting in my garage...most of them for over a year . I want to pick up a new clutch and exhaust but I told my wife I was done spending money on the car.....so i could pull a technicality on her and use paypal funds to buy some new parts

I always struggle with the fact that someday I may use them again I might be a bit of a hoarder as well
 
Reply
Old Jan 8, 2012 | 07:29 PM
  #5  
c_morse's Avatar
Registered User
iTrader: (76)
Joined: Aug 2010
Posts: 1,363
Likes: 129
From: Langley AFB, VA
Is any of the silver finish wearing off the TK shift ****? If not, PayPal please.

BTW, amazing parts with nice prices!
 
Reply
Old Jan 8, 2012 | 07:32 PM
  #6  
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member

Those shift ***** go so fast,highly wanted
 
Reply
Old Jan 8, 2012 | 07:58 PM
  #7  
UCIMAplaya2's Avatar
Registered User
iTrader: (8)
Joined: May 2009
Posts: 603
Likes: 16
From: Orlando FL
I'll take the greddy catch can.
 
Reply

Trending Topics

Old Jan 8, 2012 | 08:19 PM
  #8  
Sylvan lake V35's Avatar
Thread Starter
|
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
TK **** sold.
 
Reply
Old Jan 8, 2012 | 08:29 PM
  #9  
Swivel's Avatar
Moderator
iTrader: (13)
Joined: Jan 2007
Posts: 19,680
Likes: 161
From: Calgary, AB, CANADA
I'll take the PS tank (no, really, I will) and can pick up from you this week when you're in Cal. Paypal ready. Maybe the Greddy catch can too if the deal doesn't happen with UCIMA.
 
Reply
Old Jan 8, 2012 | 08:59 PM
  #10  
Sylvan lake V35's Avatar
Thread Starter
|
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
There is alot more interest than I thought, please if you paypal on the paypal notes let me know what address you want it shipped to and your screen name some where in there.

Thanks guys
 
Reply
Old Jan 8, 2012 | 09:00 PM
  #11  
Infiniti_Energy's Avatar
Registered User
iTrader: (40)
Joined: Oct 2009
Posts: 503
Likes: 0
From: Chicago
Originally Posted by Sylvan lake V35
I seriously hate selling parts so bad. A guy put up a WTB thread for a discontinued Greddy shift **** I have sitting in my garage i PMed letting him know I had an un-used one sitting in my garage he wanted it for pretty much what shipping would cost if i have to take the time to box something up and go drive to the post office and stand in line to ship it to make $10 maybe I have too much money but that is alot of screwing around for $10. I hate dealing with tire kickers and low ballers so these parts have been sitting in my garage...most of them for over a year . I want to pick up a new clutch and exhaust but I told my wife I was done spending money on the car.....so i could pull technicality on her and use paypal funds to buy some new parts

I always struggle with the fact that someday I may use them again I might be a bit of a hoarder as well
Not sure how bad of a hoarder you can be if its ARC parts and other shiny objects lol. Better then hoarding cats or pineapples or whatever people hoard these days.

But I get where your coming from, I enjoy reselling parts because I usually make off of them so it makes sense for me, then again im just a college kid with earnings of about 20k a year lol. Just buy your wife something decently expensive and that'll keep her content for you to scoop some more parts. Thats what I did to my girlfriend, I bought her an iPad and that let me ***** around wheels and exhausts for a bit longer.
 
Reply
Old Jan 8, 2012 | 09:43 PM
  #12  
GreenGoblin's Avatar
The goblin resurrection
iTrader: (66)
Joined: Oct 2006
Posts: 25,863
Likes: 187
From: In my garage
Premier Member

Some nice goodies Gord, I will see if I anyone I know is looking for those items.
 
Reply
Old Jan 8, 2012 | 10:08 PM
  #13  
Sylvan lake V35's Avatar
Thread Starter
|
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
Originally Posted by Infiniti_Energy

But I get where your coming from, I enjoy reselling parts because I usually make off of them so it makes sense for me, then again im just a college kid with earnings of about 20k a year lol. Just buy your wife something decently expensive and that'll keep her content for you to scoop some more parts. Thats what I did to my girlfriend, I bought her an iPad and that let me ***** around wheels and exhausts for a bit longer.

Not sure if you have ever seen my car....lets just say my wife has a ridiculous amount of designer purses and jeans The problem with that is it almost doubles the cost of car parts well not quite the TT kit was a LV purse and the HRE wheels were a Burberry ect ect so I am getting away less than 15% of car parts to purses . Don't get me wrong she is fairly understanding she never said much when I impulse bought the Project Mu BBK (I already had a Wilwood BBK) but we are planning on buying a new house in spring and we are trying to limit our spending until then

I have been wanting an SUV lately, I am about 6'0" 255lbs so i am not finding the G as comfortable as I once did it seems most days I would rather drive my Titan than my G. I have been looking at Cayenne Turbos, X5s and Jeep SRT 8s. I found an SRT 8 fairly cheap locally so i might buy that for my wife when I get back from work next week end....then slowly take it over as my next project It would be quick (after I boost it) and more comfortable for my family wife and two little girls. So i am going to finish the car up with a new clutch, 3" exhaust and a tune then either keep it for racing or if my Jeep plan goes well maybe part the G out in a couple years.

Originally Posted by GreenGoblin
Some nice goodies Gord, I will see if I anyone I know is looking for those items.
Thanks
 

Last edited by Sylvan lake V35; Jan 8, 2012 at 10:21 PM.
Reply
Old Jan 8, 2012 | 10:39 PM
  #14  
CandlestickPark's Avatar
ill Sedan
Staff Alumni
iTrader: (87)
Joined: Jun 2007
Posts: 23,261
Likes: 2,688
From: Long Beach, SoCal
Premier Member

Gord you should keep that ARC oil cooler and put it behind your grill!

BUMP for a great guy and some awesome parts. GLWS man.
 
Reply
Old Jan 8, 2012 | 10:52 PM
  #15  
Ray Ray's Avatar
Registered User
iTrader: (16)
Joined: Aug 2008
Posts: 531
Likes: 43
From: Hayward, Ca.
Sick engine bay Sylvan Lake V35! GLWS on the rare ARC parts! I want that oil cooler but i can't afford that right now. lol
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:32 AM.