PART OUT!! Everything priced to sale!!
#1
12-01-2006, 05:20 PM
PART OUT!! Everything priced to sale!! *Updated Pics*
We’ll the journey had to come to an end sometime. Those of you that know me knew I was tempted to sell the G a few months ago, before I decided to go FI. We’ll I should have went with my gut feeling, because the supercharger was nice for awhile, but I think I have just lost the love for the G. Time to move on to something else.
So now to the good stuff – every aftermarket part is for sale. Grab these things while they last, they are priced to sale. Package deals can be negotiated. I have pictures of the car that will be up soon, and will have pictures of each part upon request. PM me or email me at jbranham1017@adelphia.net - Serious inquires only. I’m located in Orange County, Ca. (90620)
The car went into the sho ptoday to have everything removed. Everything should be available for pick up/ship by next weekend (12/9).
All prices DO NOT include shipping. Local pick up has priority.
All parts are off of my 2004 G35 Coupe 5AT.
Full Vortech Supercharger Kit (Polished) – The kit has been on less than 3000 miles. This includes everything you will need to bolt this thing on your car and go. I am including the 60mm Defi BF series gauges (Boost, Fuel Press, and Oil Temp.) and the Defi link meter which you have to have for the gauges. Paid $4700+ shipping for the Vortech kit and $900 for the gauges, price $4000 SOLD
Fluidampr Crank pulley – It added 0.9 psi of boost, while smoothing things out. Using only 3 parts--a laser-welded sealed housing, an internal inertia ring, and a highly viscous silicon fluid between the two--this SFI-approved Fluidampr can control all crankshaft vibration, not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure. Paid $350+shipping, price $150 SOLD
20” Zenetti Duece’s – 8.5” up front and 10” in the rear. These are wrapped in Bridgestone Potenza S03’s. The fronts are 245/35, and the rears are 285/30. Those of you who have these tires, know how expensive they are. The tires have 8/10 tread wear. I don’t even remember how much I paid for these. Price $1000 SOLD
Stillen Adjustable Sway bars - Stillen 3-way adjustable sways (F/R), probably one of the best mods for this car. Paid $300+ for them, price $200 SOLD
Tanabe NF210 springs – NF series stands for Normal Feel. The drop: is approximately 1.0F/0.6R. Price $100 SOLD
Motordyne 5/16” Copper ISO-Thermal Plenum Spacer – Plenty of information on the boards about this product. $200 SOLD
Strup headers - T-304 #1 grade stainless steel tubing, polished to a bright luster. 1 5/8” mandrel bent tubing X .065 wall thickness. Flange is 3/8” thick stainless steel. All headers are TIG welded construction - made in the USA - not shipped from overseas.They have been on the car for about a year. Paid $450 plus shipping. Price $300 SOLD
Crawford High-Flow cats – These have been on the car for less than 3000 miles. I got a deal and snagged these for $450 shipped. $300 SOLD
HKS Dual Hi-Power Ti Exhaust System – You all know how sweet this exhaust is. It’s been on the car for about 8 months now. I paid something around $1500. $1000 SOLD
Top Secret replica front bumper – This bumper is made of quality polyurethane. I picked this up from www.TheModCity.com when they had the group buy. I had the side markers filled in, otherwise known as shaved and it’s painted Caribbean blue. Paid something like $450 for it. I know most of you don’t have a CB coupe, which is why the price is $150 SOLD
Ings+1 replica side skirts – I purchased these from the www.TheModCity.com as well. These are also made from quality polyurethane, as well as painted Caribbean blue. I paid somewhere around $450 for them. $150 SOLD
Chrome hood dampers – I picked these up from the one and only Sundeviljay. He hooked me up with these when he was first getting them. Price is $50 SOLD
Stillen Engine dampner – I purchased this directly from Stillen. If you don’t know what this does, here’s what Stillen’s website states “When an engine moves excessively in its mounts, energy is wasted. Stillen's engine stabilizer converts this wasted motion into forward momentum. An isolastic mount acts as a shock absorber and dampens unwanted motion. With no hydraulic parts to wear or fade in use, this is a long term solution. Easy mounting uses existing holes and complete instructions are provided.” I paid about $150 shipped. Price is $75. SOLD
Thanks,
Jonathan
Here are some pics of the SC installed.
Pics of bumper and sides...
Pics of the Headers...
So now to the good stuff – every aftermarket part is for sale. Grab these things while they last, they are priced to sale. Package deals can be negotiated. I have pictures of the car that will be up soon, and will have pictures of each part upon request. PM me or email me at jbranham1017@adelphia.net - Serious inquires only. I’m located in Orange County, Ca. (90620)
The car went into the sho ptoday to have everything removed. Everything should be available for pick up/ship by next weekend (12/9).
All prices DO NOT include shipping. Local pick up has priority.
All parts are off of my 2004 G35 Coupe 5AT.
Full Vortech Supercharger Kit (Polished) – The kit has been on less than 3000 miles. This includes everything you will need to bolt this thing on your car and go. I am including the 60mm Defi BF series gauges (Boost, Fuel Press, and Oil Temp.) and the Defi link meter which you have to have for the gauges. Paid $4700+ shipping for the Vortech kit and $900 for the gauges, price $4000 SOLD
Fluidampr Crank pulley – It added 0.9 psi of boost, while smoothing things out. Using only 3 parts--a laser-welded sealed housing, an internal inertia ring, and a highly viscous silicon fluid between the two--this SFI-approved Fluidampr can control all crankshaft vibration, not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure. Paid $350+shipping, price $150 SOLD
20” Zenetti Duece’s – 8.5” up front and 10” in the rear. These are wrapped in Bridgestone Potenza S03’s. The fronts are 245/35, and the rears are 285/30. Those of you who have these tires, know how expensive they are. The tires have 8/10 tread wear. I don’t even remember how much I paid for these. Price $1000 SOLD
Stillen Adjustable Sway bars - Stillen 3-way adjustable sways (F/R), probably one of the best mods for this car. Paid $300+ for them, price $200 SOLD
Tanabe NF210 springs – NF series stands for Normal Feel. The drop: is approximately 1.0F/0.6R. Price $100 SOLD
Motordyne 5/16” Copper ISO-Thermal Plenum Spacer – Plenty of information on the boards about this product. $200 SOLD
Strup headers - T-304 #1 grade stainless steel tubing, polished to a bright luster. 1 5/8” mandrel bent tubing X .065 wall thickness. Flange is 3/8” thick stainless steel. All headers are TIG welded construction - made in the USA - not shipped from overseas.They have been on the car for about a year. Paid $450 plus shipping. Price $300 SOLD
Crawford High-Flow cats – These have been on the car for less than 3000 miles. I got a deal and snagged these for $450 shipped. $300 SOLD
HKS Dual Hi-Power Ti Exhaust System – You all know how sweet this exhaust is. It’s been on the car for about 8 months now. I paid something around $1500. $1000 SOLD
Top Secret replica front bumper – This bumper is made of quality polyurethane. I picked this up from www.TheModCity.com when they had the group buy. I had the side markers filled in, otherwise known as shaved and it’s painted Caribbean blue. Paid something like $450 for it. I know most of you don’t have a CB coupe, which is why the price is $150 SOLD
Ings+1 replica side skirts – I purchased these from the www.TheModCity.com as well. These are also made from quality polyurethane, as well as painted Caribbean blue. I paid somewhere around $450 for them. $150 SOLD
Chrome hood dampers – I picked these up from the one and only Sundeviljay. He hooked me up with these when he was first getting them. Price is $50 SOLD
Stillen Engine dampner – I purchased this directly from Stillen. If you don’t know what this does, here’s what Stillen’s website states “When an engine moves excessively in its mounts, energy is wasted. Stillen's engine stabilizer converts this wasted motion into forward momentum. An isolastic mount acts as a shock absorber and dampens unwanted motion. With no hydraulic parts to wear or fade in use, this is a long term solution. Easy mounting uses existing holes and complete instructions are provided.” I paid about $150 shipped. Price is $75. SOLD
Thanks,
Jonathan
Here are some pics of the SC installed.
Pics of bumper and sides...
Pics of the Headers...
Last edited by SWATSON; 01-12-2007 at 09:48 PM.
#3
12-01-2006, 05:32 PM
Join Date: Oct 2005
Location: Los Gatos, CA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
PM me pricing shipped to 95030 for 5/16" spacer, HKS exhaust, and stillen sways. i'm very interested in those......dibs for all three items!!!! ty =)
#6
12-01-2006, 07:19 PM
Join Date: Jun 2005
Location: Irvine, CA
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
TS replica Front Bumper
PM and E-mail sent about TS Front Bumper. I'm local in Irvine, CA.
Last edited by suhochunsah; 12-01-2006 at 07:29 PM.
#7
12-01-2006, 07:31 PM
Oh Snap! Top Secret front bumper and ING...$300 both what the heck 
I am in Orange County and have a CB Coupe. Hit me up. I am interested in the spacer and header as well.
I am in Orange County and have a CB Coupe. Hit me up. I am interested in the spacer and header as well.
Last edited by Sukairain; 12-01-2006 at 07:49 PM.
Trending Topics
#8
12-01-2006, 08:26 PM
Join Date: Apr 2005
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Emailed you about the supercharger and gauges. Oh and pics would be nice 
Last edited by atldpg3503; 12-01-2006 at 09:25 PM.
#12
12-02-2006, 07:35 AM
Thanks for all the PM's guys, Im trying to get back to everyone with shipping quotes, paakage deals, etc.. The prices are low as it is, please stop all the low ball offers. Package deals will be considered. Thanks again
#15
12-02-2006, 12:04 PM
Join Date: Mar 2004
Location: LI,NEW YORK
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts