FS: Pair of FastIntentions Metallic High Flow Cats
FS: Pair of FastIntentions Metallic High Flow Cats
SOLD!!!
FS: Pair of FastIntentions Metallic High Flow Cats
On the car since Jan 26, 2007. Used only for 4 months in naturally aspirated form. I wanted to use them with my twin turbo set up, but they were too restrictive so they have to go. They have been on the dyno and tested with the JWT TT kit and performed well to about 420 whp (on Sharif's dyno, that's over 450 whp on a dynojet). I wanted more, so test pipes are now in place. Except for 1 or 2 dyno sessions, these cats have not been used for FI. So total of less than 5 months use.
Here's a chance to get a great deal on 2.5" FI metallic cats, 300 cell. Brand new these retail for over $600 for the pair and have spare bungs for additional wideband sensors.
I will carefully pack and ship, with spare bungs closed off with anti-seize, for $350 shipped to anywhere in the continental US. I would recommend getting new gaskets from a local auto store, but I will include the gaskets that were returned to me by ForgedPerformance.
FS: Pair of FastIntentions Metallic High Flow Cats
On the car since Jan 26, 2007. Used only for 4 months in naturally aspirated form. I wanted to use them with my twin turbo set up, but they were too restrictive so they have to go. They have been on the dyno and tested with the JWT TT kit and performed well to about 420 whp (on Sharif's dyno, that's over 450 whp on a dynojet). I wanted more, so test pipes are now in place. Except for 1 or 2 dyno sessions, these cats have not been used for FI. So total of less than 5 months use.
Here's a chance to get a great deal on 2.5" FI metallic cats, 300 cell. Brand new these retail for over $600 for the pair and have spare bungs for additional wideband sensors.
I will carefully pack and ship, with spare bungs closed off with anti-seize, for $350 shipped to anywhere in the continental US. I would recommend getting new gaskets from a local auto store, but I will include the gaskets that were returned to me by ForgedPerformance.
Last edited by rcdash; Nov 1, 2007 at 05:54 PM.
The ForgedPerformance crew added a weld line on one of the cats to make it fit better with the JWT TT kit. You may need to have an exhaust shop slightly adjust fitment to your specific exhaust. The price has been reduced to $350 to reflect this. (It may work just fine as the adjustment was slight and there is some play in most exhaust systems).
This was designed for 03-06. It should work on all cars as they basically replace the stock cats (between the header and the cat-back exhaust) - at least for 03 - 06 I am sure they are the same.
Here is the website for this:
http://www.fastintentions.com/exhaus...ti_default.htm
I imagine minor fitment issues should be no problem for an exhaust installer.
Here is the website for this:
http://www.fastintentions.com/exhaus...ti_default.htm
I imagine minor fitment issues should be no problem for an exhaust installer.
Last edited by rcdash; Oct 26, 2007 at 02:47 PM.
Yes, paypal accepted. You do not need a paypal account - you can use a credit card. I am a verified paypal seller. Just go to www.paypal.com and click the "send money" tab.
The first of the inquiries to send payment to rc@dashcorp.com will get these at a great price
. Until then they stay on the market!
The first of the inquiries to send payment to rc@dashcorp.com will get these at a great price
. Until then they stay on the market!
Thread
Thread Starter
Forum
Replies
Last Post
Freeman186
Engine, Drivetrain & Forced-Induction
1
Sep 6, 2023 10:07 AM
