there are no fitment differences between the regualr and the the revup cams. for the exhaust cams to work on a revup, they would need to have the cam sensor piece on the tail of the cams. other than that, there is no reason why they wouldn't fit.

for example, you can put revup cams in a regular DE motor for a cheap cam upgrade (more lift and duration). there are no fitment issues.

 

$500, and I'll OVERNIGHT THEM...

Ebay ad... http://cgi.ebay.com/ebaymotors/CAMS-...spagenameZWD1V

 

Slow your roll, tough guy. You and your single post count, newbie status on this forum decided to post that you had cams for sale, which you say you got off of Ebay.

When you were asked what brand they are, you replied with "JDM", (which is not a brand) and further claim that they are the equivalent of JWT cams. How are they the equivalent?

From your lack of information, new status, and use of "JDM" like it's some holy grail of tuner buzz-words, it does sound fishy.

Either you thought the above information was enough for you to buy them off of ebay, then learned that you got taken, or you are the guy trying to make a quick buck from somebody here.

In either case, everything you have stated in this thread is the very definition of shady.

Good luck to the Poor SOB that believes your sales pitch without real proof of make and quality.

 

interesting

 

fleabay eh? good luck with the sale, i'd post it on craigslist or something... dont expect someone on here to pay u a lot for fleabay cams

and just FYI the rev up motor uses a completely different grind, so these cams wont work on a rev up motor

 

about the same time they started selling altezza's

 

god damn scamming piece of ****ing ****

 

First off, maybe a noob on the forum, not a noob to autos.

Second, I bought them off Ebay, yes, and on that listing, it claims them as JDM as the maker. On the box, it reads "Performance Camshaft". They are equivalent in materiel, and in grind.

Eh, so JDM was incorrect. My bad.

I didn't get taken, I bought them with the intention of putting them on the car. I ended up selling the car (sold a piece of my heart with it btw) for an LS1 Camaro (the G just didn't have the speed I needed, and couldn't keep up!). My bad on making it sound fishy. It shouldn't sound that way.

If someone buys these, has them professionally installed, and doesn't find a gain of at least 10whp, send them back, and I'll refund you the money.

 

installing cams takes alot of time and if you pay to have it done its about 800-900 so i wouldnt use cheap ebay cams for that kind of install esp on a sensitive internal part

 

i think its ridiculous.. cams have to be ground specifically for that the buyer has in mind, i.e the grinding on a turbo app would be different then the grind on an N/A application.. for example JWT cams come in various different grinds depending on what u want.. also the metal they use to c&c the shaft itself has to be to exact specifications i'd never, never trust some off brand company off of fleabay when it comes to something as important as camshafts.. if you were lookin to save a buck while building ur car by getting cheap parts the G is really the wrong route to go, hope u have better luck with ur LS1

 

Good to know, but how do WE know that? You have no reputation here, therefor, anything you post is already going to be received with a higher level of cynicism than a member with a high post count. You do realize this, right?

Again, JDM is not a manufacturer. Either you didn't know that to begin with, or you thought that nobody here wouldn't ask. In either case, people who are knowledgeable of imports know the difference, and this is yet another reason why members here might question the quality and accuracy of the information you give us.

Again, where is the proof? How do you know? I can put "guaranteed" on a box and drop some BS into it, and all I've sold you is a guaranteed piece of BS.

If you haven't installed them, and you cannot offer any real proof of quality, then, there is very little tangible integrity to offer in support of this sale.

The money for the part, shipping, install & tune, uninstall & re-tune, etc...?

You may be an honest individual. You may even have purchased a legitimate part. The issue is that while we have some long time members, and some short time members, we, for the most part, try to look out for one another. I still don't think you have proven that the parts you are trying to sell are what you say/believe them to be.

Good Luck to a legitimate sale, but buyer beware.

 

HAHAHAHAHAHA EBAY CAMS HAHAHAHAHA, holy sh*t who da fvck would install ebay cams on their cars, that's asking for it, cams aint no simple mod....but hey u know what? GOOD LUCK WITH THE SALE