SOLD


I'll have pics up tomorrow. It will ship from ForgedPerformance (I switched to evoTT)). Used for 6k miles only. Two issues.

1. The passenger side front pipe (that attaches to cat) was shortened to fit so this will require some fabrication work to get back to stock length. Shouldn't be more than 1-2 hours work for an exhaust shop to weld in a straight segment of the right length.

2. Only other issue is minor clearancing required to properly clear the finned rear diff cover (FP just dented the pipe at two points).

The mufflers and tips are dent free with a few surface scratches only from sitting on the floor of FP - easily polished out.

$500 obo, shipped from Forged. This is for a G35, but easily modified (shortened for a 350Z).

 

Interested, why did you switch?

Also, "fabrication work required " meaning it will require the correct pipe length to fit a G? Was it was cut when removing it?

Thks

 

No it was cut to get APS 3.5" test pipes to fit with JWT 700bb turbos. I removed it to get more power with an EvoTT (which did not net any increased power, because I added cats at the same time - aargh!).

This is a great exhaust and honestly I wished I hadn't bought the evoTT as it was unnecessary.

Pictures - please note the two issues as described above.

Stainless steel version - polished mufflers and tips.

Hardware (bolts) included, but gaskets were thrown out (would recommend new ones anyway). Not an issue for an exhaust shop...

 

Sent PM

 

Still available?

 

Sale pending... will update this thread if it falls through or is completed.

Thanks for interest.

EDIT: SOLD