you always do that crap... ahahaha

 

you can also buy 05-07... they are all the same

 

hey guys im goin to homedepot 2morrow to see if i can make a custom mold for that missing right piece

should i buy this

http://www.homedepot.com/webapp/wcs/...10000003+90106

and it saids i need to mix it with something but i dont know what..anyone have any input? thx

 

anybody?...

 

link show a page error for me.

 

Steel-Reinforced Epoxy Putty Stick

Epoxy putty sticks are the ultimate for small or emergency repairs. They are fast and easy to use, and bond instantly with superior strength. It is as easy as cut, mix, fix! This steel-reinforced epoxy putty stick is a fast-setting, industrial-strength polymer compound that enables permanent repairs to anything made of steel or other metals. It also bonds to wood, glass, masonry, and many plastics. Each handy stick contains pre-measured portions of activator and base throughout, so no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colors blend into one color to indicate complete mixing. The consistency (like modeling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. It cures to a dark gray metallic color. Once cured, it can be tapped, drilled, screwed, sawed, machined, ground, filed, or painted.

Rebuild small engine parts, seal leaks, fill cracks & voids in metal, & fashion handles.
Belongs in every workshop & toolbox.
Form nuts and bolts, repair stripped threads & anchor machines.
Repair metal tools, equipment ducts, housing and appliances, & sink traps.
Works on anything made of steel or other metals.
Also bonds to wood, glass, masonry & many plastics.
The ultimate fix for small or emergency repairs.
Easy to use & mistake proof, just cut, mix, fix!
Bonds instantly with superior strength.
Saves hundreds of dollars in repairs.
MFG Model # : 600451070B
MFG Part # : 600451070B

Specifications
Assembled Depth (In Inches) : 1.2 In.
Assembled Height (In Inches) : 7.5 In.
Assembled Weight (In LBS) : .0625
Assembled Width (In Inches) : 4.25 In.
Chemical Clean-Up : Water, alcohol, mineral spirits
CircleEFriendly : N
Energy Star Compliant : False
Size (Oz.) : 2 Oz.
Product Reviews
Review and Rate Products


Share your opinion about products you\'ve purchased with others. Write reviews and rate products on a scale from 1 to 5. It\'s easy and takes only a few minutes.

Review Writing Guidelines:
Focus on the product features and your experience with them. Provide details about why you like or dislike the product.

Things to avoid:
Obscenities, discriminatory language, or other language not suitable for public forums

Advertisements, "spam" content, or references to other products, offers or Web sites

E-mail addresses, URLs, phone numbers, physical addresses or other forms of contact information

Critical or spiteful comments on other reviews posted on the page or their authors






__USERID__
http://www.homedepot.com/webapp/wcs/...0053&langId=-1
Product Reviews Review This Product


Warranty
Warranty

For warranty information on this product, please call our Internet Customer Service Center at 1-800-435-4654.

 

ehhh, Also bonds to wood, glass, masonry & many plastics. I'd look into that more before it does any further damage to the bumper or paint. None the less it going to be covered by the diffuser.

 

then i guess ill get this one...


Fiberglass-Reinforced Epoxy Putty Stick



Epoxy putty sticks are the ultimate for small or emergency repairs. They are fast and easy to use, and bond instantly with superior strength. It is as easy as cut, mix, fix! This underwater repair epoxy putty stick is a fast-setting, fiberglass-reinforced polymer compound that enables permanent repairs to many surfaces including fiberglass, concrete, glass, metals, wood and many plastics. It is specially formulated to adhere to surfaces exposed to damp, wet or underwater (salt or fresh) conditions. Each handy stick contains pre-measured portions of activator and base throughout, so no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colors blend into one color to indicate complete mixing. It contains a fading blue dye and becomes white after mixing. The consistency (like modeling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins

Repair decks, hulls, pools, hot tubs, spas, marine recreational equipment, leaking gaskets, gutters & tanks.
Patch dings, holes & gouges.
Bond fiberglass, metal, wood, concrete, ceramic, glass & many plastics.
Specially formulated to adhere to surfaces exposed to damp, wet or underwater (salt or fresh) conditions.
The ultimate fix for small or emergency repairs.
Easy to use & mistake proof, just cut, mix, fix!
Bonds instantly with superior strength.

 

Once you rebuild that area your going to have to let it dry for like 2 days of not more to make sure its rock solid before drilling it. I think if you put a good amount of the product, that it will work. Keep your fingers crossed!

 

well i went to home depot ..thanks to mike haha..i bought the putty. i put it on like 40 mins ago..it said on the box it only needs 1 hour curing time..but im not goin to drill it anytime soon..b/c i dont have a drill anyway..i will take pics of how it turned out...

 

good luck. keep us updated.

 

just snapped a few pics
damn that putty is rock solid..its super hard...
things are looking good!
Thanks Mike!! for the awesome idea...




The right side..



i filled in the left as well...


now all i need is to drill 2 holes and put my CF DIFFUSER ON!!!! cant wait..

 

this whole diffuser thing has been an ordeal for you, i've been watching the drama unfold over the past few days. im almost expecting your diffuser to go flying off on the highway. not that i'd ever wish for that to happen.

 

thx i guess?..but the diffuser wont fly off(knockonwood)..theres two license plate screws and 4 bottom black clip things i clip on the bottom and theres 3M Double sided tape on the inside on the cf diffuser..so i dont think it will fly off..

 

pghG35 im glad it all worked out