FS: NEW 07+ OEM paddle shifters for 5AT, willow/silver/gray
#1
FS: NEW 07+ OEM paddle shifters for 5AT, willow/silver/gray
SOLD
I have a set of brand new OEM G35 paddle shifters that are plug and play on newer models. If you didn't get the sport model, you have paddle shifter wiring in place and just need the actual paddle shifters!
Here is a thread with a DIY guide: https://g35driver.com/forums/v36-diy/193619-diy-installing-sport-paddles.html
You can either modify your original trim or buy new trim pieces for a few more bucks from Riverside Infiniti. The link above has the info you need.
The paddles are usually $129 shipped by themselves.
I'm letting these go for $85 shipped. (I have an 04 and will be selecting a full kit for pre-07 cars). These are new in original packaging, purchased from Riverside Infiniti!
I have a set of brand new OEM G35 paddle shifters that are plug and play on newer models. If you didn't get the sport model, you have paddle shifter wiring in place and just need the actual paddle shifters!
Here is a thread with a DIY guide: https://g35driver.com/forums/v36-diy/193619-diy-installing-sport-paddles.html
You can either modify your original trim or buy new trim pieces for a few more bucks from Riverside Infiniti. The link above has the info you need.
The paddles are usually $129 shipped by themselves.
I'm letting these go for $85 shipped. (I have an 04 and will be selecting a full kit for pre-07 cars). These are new in original packaging, purchased from Riverside Infiniti!
Last edited by rcdash; 07-13-2008 at 10:36 PM.
#3
You can make them work following the DIY guide posted by turbocad, which is what I was going to do. However, that is not the easiest route now that Works Bell has something for pre-07 cars (coming out soon).
This is for 07 and up cars that did not come with paddles stock. The wiring is in place, so these hook right up. Plug and play. Of course getting the few extra trim pieces makes it even easier. The link in the first post has the DIY guide, but again that applies only to 2007 and up.
This is for 07 and up cars that did not come with paddles stock. The wiring is in place, so these hook right up. Plug and play. Of course getting the few extra trim pieces makes it even easier. The link in the first post has the DIY guide, but again that applies only to 2007 and up.
Last edited by rcdash; 07-05-2008 at 06:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SoEast]: 2006 DG Coupe Part Out - mrev2, projectors, etc
bu villain
Accessories
63
08-25-2016 07:14 PM
BasquiatPicasso
General Tech Questions
0
07-23-2015 06:26 PM
newbdriver01
G35 Cars
2
07-15-2015 06:10 PM