FS: CUSTOM Built 20" 9.5 / 10.5 FOOSE Wheels! 1-of-a kind!
#1
FS: CUSTOM Built 20" 9.5 / 10.5 FOOSE Wheels! 1-of-a kind!
SOLD SOLD SOLD SOLD
_________________________________________
_________________________________________
CUSTOM 1-OF-A-KIND FOOSE WHEELS!
This is a USED set of custom built wheels.
_____
For those who know both RICK and Myself, yes, these are the same wheels that were once on his Veilside Widebody Z. I picked them up when I was doing my widebody. I have not gone with a different setup altogether.
______
These wheels were custom built for a Veilside Widebody Nissan 350Z originally. These have been well taken care of over the years. These wheels were built by Foose Wheels and were a one-off set, these were NEVER available to the public or manufactured again!
Wheels are 3-piece alluminum. They were sandblasted from their original colors, buffed and polished. The center faces were then painted a custom House of Kolor HOK Metallic Gold.
NOTE: Most custom wheels do not have specs etched into the back of the wheels as most mass produced wheels do, which illustrate the overall size/width/offsets. These are the same, but the following measurements are VERY close approx. measurements.
SPECS: FRONT 20x9.5" +10mm , REAR 20x10.5" -18mm
HUGE rear 6" lip!
Application: ANY vehicle that uses 5x114.3 bolt patterns. These will be perfect for widebody Nissan applications. MAY fit Nissan 350Z, G35 Coupes w/aggresive camber and slightly stretched tires. THESE ARE A MID PAD STYLE FACE AND MAY NOT FIT OVER BIG BRAKE KITS WITHOUT SLIGHT SPACERS, ALTHOUGH THEY WERE SUPPOSEDLY ORIGINALLY DESIGNED AROUND THE NISSAN 350Z BREMBO SETUPS. (The car these are coming off of was a NIssan 350z, VERY WIDE body work, and used large spacers, so there were no clearance issues, but I have not seen these on a Brembo model Z or G).
These may also be an aggressive but workable fitment for Nissan 370Z.
Quality : These are custom painted wheels, not powdercoated, and you can see very slight "chipping" from around the center caps on some of the wheels, but overall nothing that cannot be touched up. There is ONE rear wheel that has a very slight 1/4 ding on the INSIDE lip, please see the highlighted pics for the close ups.
NOTE: TIRES THAT ARE IN PHOTOS ARE NOT INCLUDED. This is for the wheels only, no tires.
(Tire sizes that were mounted on the wheels were 245-35-20 front, 275-30-20 rear. You can get up to a 295 on the rear with ease, the 275's were stretched on the rear).
______
My assumption on fitment on the above mentioned cars comes fromthe fact that the setup I have now on my car is an AGGRESSIVE setup for a 370Z, and when fitted on my car, the new wheels I am using sit just as flush as the old ones that are for sale here. Simply different widths.
With custom made wheels, It is REALLY hard sometimes to guess fitment, so I just stated the one observation that I found.
_______
I would really like to get $1900 or so for these, (shipping is up to the purchaser).
BUT I am VERY open to trades + cash, Trades for other wheels or rare parts, or BEST OFFER.
I have absolutely no space for these at home, I need to get them gone. My new garage isn't big enough! Any my girl want's to part her car inside LOL.
so help me help you, and let's strike a deal!
pics:
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSESET.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREAR.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARMARKINGS.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARMARKING2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARLIP.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARBACK.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARBACK2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREAR1.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSELIPSIZE.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONT.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONTBACK.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONT2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSECENTERCAP.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/WIDEBODY%202-22-09/rearquarter.jpg)
_________________________________________
_________________________________________
CUSTOM 1-OF-A-KIND FOOSE WHEELS!
This is a USED set of custom built wheels.
_____
For those who know both RICK and Myself, yes, these are the same wheels that were once on his Veilside Widebody Z. I picked them up when I was doing my widebody. I have not gone with a different setup altogether.
______
These wheels were custom built for a Veilside Widebody Nissan 350Z originally. These have been well taken care of over the years. These wheels were built by Foose Wheels and were a one-off set, these were NEVER available to the public or manufactured again!
Wheels are 3-piece alluminum. They were sandblasted from their original colors, buffed and polished. The center faces were then painted a custom House of Kolor HOK Metallic Gold.
NOTE: Most custom wheels do not have specs etched into the back of the wheels as most mass produced wheels do, which illustrate the overall size/width/offsets. These are the same, but the following measurements are VERY close approx. measurements.
SPECS: FRONT 20x9.5" +10mm , REAR 20x10.5" -18mm
HUGE rear 6" lip!
Application: ANY vehicle that uses 5x114.3 bolt patterns. These will be perfect for widebody Nissan applications. MAY fit Nissan 350Z, G35 Coupes w/aggresive camber and slightly stretched tires. THESE ARE A MID PAD STYLE FACE AND MAY NOT FIT OVER BIG BRAKE KITS WITHOUT SLIGHT SPACERS, ALTHOUGH THEY WERE SUPPOSEDLY ORIGINALLY DESIGNED AROUND THE NISSAN 350Z BREMBO SETUPS. (The car these are coming off of was a NIssan 350z, VERY WIDE body work, and used large spacers, so there were no clearance issues, but I have not seen these on a Brembo model Z or G).
These may also be an aggressive but workable fitment for Nissan 370Z.
Quality : These are custom painted wheels, not powdercoated, and you can see very slight "chipping" from around the center caps on some of the wheels, but overall nothing that cannot be touched up. There is ONE rear wheel that has a very slight 1/4 ding on the INSIDE lip, please see the highlighted pics for the close ups.
NOTE: TIRES THAT ARE IN PHOTOS ARE NOT INCLUDED. This is for the wheels only, no tires.
(Tire sizes that were mounted on the wheels were 245-35-20 front, 275-30-20 rear. You can get up to a 295 on the rear with ease, the 275's were stretched on the rear).
______
My assumption on fitment on the above mentioned cars comes fromthe fact that the setup I have now on my car is an AGGRESSIVE setup for a 370Z, and when fitted on my car, the new wheels I am using sit just as flush as the old ones that are for sale here. Simply different widths.
With custom made wheels, It is REALLY hard sometimes to guess fitment, so I just stated the one observation that I found.
_______
I would really like to get $1900 or so for these, (shipping is up to the purchaser).
BUT I am VERY open to trades + cash, Trades for other wheels or rare parts, or BEST OFFER.
I have absolutely no space for these at home, I need to get them gone. My new garage isn't big enough! Any my girl want's to part her car inside LOL.
so help me help you, and let's strike a deal!
pics:
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSESET.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREAR.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARMARKINGS.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARMARKING2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARLIP.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARBACK.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREARBACK2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEREAR1.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSELIPSIZE.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONT.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONTBACK.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSEFRONT2.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/FOOSECENTERCAP.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/WIDEBODY%202-22-09/rearquarter.jpg)
![](http://img.photobucket.com/albums/v206/tonyatperformance/WIDEBODY%202-22-09/sidegood.jpg)
Last edited by Ray@OCInfiniti; 05-29-2009 at 01:56 PM.
Trending Topics
#13
These wheels are a tad tricky to balance, due to the rear portion of the barrel being so small...