FS/FT: 19" 3 peice forged wheels and tires p zeros
#1
FS/FT: 19" 3 peice forged wheels and tires p zeros
*********SOLD**********
bought these off someone a week ago and im turboing the car so im going with a smaller wheel, these retail for over $3000 not including the tires which are about $400 just for a rear tire! if you want something extremely aggressive look no further, tires run about $1200, so your looking at over $4200 new, these are used so im asking $2500 for everything OBO. these ride extremely quiet on my z. pick up only for now. may ship if i get right amount.
basically the same as iforged aeros but are MAKAVELI MOSELINI custom 3 peice forged rims.
you can find them here:
http://www.wheelsdirectonline.com/makaveli/makaveli.htm
will consider offers and trades!
welcome to come by and try them on, rear rims are 10.5
fronts are 9.5
4.5" rear lip and 3" inch front lip
call 609 703 3562 with any questions
or email sdevers222@msn.com
bolt pattern is 5x114.3 or 5x4 1/2"
very minor scratches here and there nothing noticible unless your searching up close.
perilli p zeros all around
305/20/19 rears (like new week old)
275/35/19 lots of tread left
i had to use 20mm spacers in front to clear brembos and 25mm in rear, but would have worked with a 5mm in rear with slip on spacers but i could not find any. will throw spacers at reasonable cost.
make offer
bought these off someone a week ago and im turboing the car so im going with a smaller wheel, these retail for over $3000 not including the tires which are about $400 just for a rear tire! if you want something extremely aggressive look no further, tires run about $1200, so your looking at over $4200 new, these are used so im asking $2500 for everything OBO. these ride extremely quiet on my z. pick up only for now. may ship if i get right amount.
basically the same as iforged aeros but are MAKAVELI MOSELINI custom 3 peice forged rims.
you can find them here:
http://www.wheelsdirectonline.com/makaveli/makaveli.htm
will consider offers and trades!
welcome to come by and try them on, rear rims are 10.5
fronts are 9.5
4.5" rear lip and 3" inch front lip
call 609 703 3562 with any questions
or email sdevers222@msn.com
bolt pattern is 5x114.3 or 5x4 1/2"
very minor scratches here and there nothing noticible unless your searching up close.
perilli p zeros all around
305/20/19 rears (like new week old)
275/35/19 lots of tread left
i had to use 20mm spacers in front to clear brembos and 25mm in rear, but would have worked with a 5mm in rear with slip on spacers but i could not find any. will throw spacers at reasonable cost.
make offer
Last edited by akk08; 06-26-2009 at 03:35 PM.
Trending Topics
#8
custom offsets, custom wheels, these are never pre made, you have to order then they make them to whatever offsets, lip sizes,ect you want. top of line highest quality forged 3 peice wheels, research the brand name. your welcome to try them on your sedan, on a 350z they will be flush with fenders if you do not have brembos, if you have brembos, slighty past fenders because spacers are needed (as seen in pics), pretty much the same on a g35. this is a steal for the price.
#12
actual retail is around 1600
http://viprims.com/WheelDetail2.asp?Link=2506
They are listed for 422 each.
http://viprims.com/WheelDetail2.asp?Link=2506
They are listed for 422 each.
lol...damaged and they still want $1600...and thats if they can find ones with specs you like. oh wait...422 a peice is more like 1700 plus shipping and tax brings you up to about $1900 for damaged rims without tires....hmmm not such a good deal..
taking directly from their members area:
"Many of the wheels are blemished wheels which mean they may have a small nick or scratch, and due to that small imperfection they can not be sold at retail value, which will save you a lot of money."
like i said before these are custom made...you order the specifics you want then they make them, the place you listed were made for another car and 90% of the time they will not be able to find the correct bolt pattern...offsets...rim size...your looking for...this is why they make you buy a membership...its pretty much a scam...yes they will have those wheels at that price but not in the specs your looking for....
so go buy a membership to that site and see what happens.
THE WHEELS IM SELLING ARE THE HIGHEST QUALITY 3 PEICE FORGED WHEELS AND I CAN PROVE IT.
not to mention the tires are perilli p zeros which are not cheap.
http://www.makaveliwheels.net/home_frameset.html
Last edited by akk08; 06-13-2009 at 02:04 PM.
#15
i needed to know the offset because I have a Sedan.....but judging by the fact it's flush with a Z....it's probably way too low for the sedan and will stick out way past the fender.
GLWS!
GLWS!