FS: Great core VQ35DE for motor build project!
#1
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Great core VQ35DE for motor build project!
PRICE: $550 firm
LOCATION: Linthicum, MD
CONTACT: PM to shdowflare
CAR TYPE: 03-04 Coupe/Sedan
Well, my motor build project is history, and I know have to part out everything I bought! So first up for grabs is a used VQ35DE non-revup motor (block AND head AND accessories), that was going to be the built motor for my 700hp beast project (which never happened, lol)! I paid my mechanic - the amazing Frank Hill - $300 in labor to break it down, inspect it thoroughly, and measure everything. All components are still within factory specifications so Frank certified it ready for a build project. He also said it had no noticeable defects and would be perfect for a full rebuild and forced-induction after some cleanup! Also included are an alternator, upper plenum, and water pump (not pictured). Below are some pics of the disassembled motor!
Please take a look and PM me if you're interested. The gear is at Frank's if anyone wants to take a look at it.
PS. One of the valves is burnt, so the head would need to either be redone (I was going to put in a full Ferrea valvetrain through HeadGames), or at least have it repaired.
LOCATION: Linthicum, MD
CONTACT: PM to shdowflare
CAR TYPE: 03-04 Coupe/Sedan
Well, my motor build project is history, and I know have to part out everything I bought! So first up for grabs is a used VQ35DE non-revup motor (block AND head AND accessories), that was going to be the built motor for my 700hp beast project (which never happened, lol)! I paid my mechanic - the amazing Frank Hill - $300 in labor to break it down, inspect it thoroughly, and measure everything. All components are still within factory specifications so Frank certified it ready for a build project. He also said it had no noticeable defects and would be perfect for a full rebuild and forced-induction after some cleanup! Also included are an alternator, upper plenum, and water pump (not pictured). Below are some pics of the disassembled motor!
Please take a look and PM me if you're interested. The gear is at Frank's if anyone wants to take a look at it.
PS. One of the valves is burnt, so the head would need to either be redone (I was going to put in a full Ferrea valvetrain through HeadGames), or at least have it repaired.
Last edited by shdowflare; 02-04-2010 at 12:17 AM.
#3
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Hey man - thanks for the interest. For now, I'm hoping I can dish this thing off as one whole part. If that doesn't seem to be working, I may consider parting out the motor itself, and you'll be one of the first to know about it.
Thanks!
Brian
Thanks!
Brian
#6
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
I'm asking $550, or best offer. Of course local pickup is preferred, but I will ship as long as the buyer pays for all shipping charges!
Last edited by shdowflare; 01-13-2010 at 04:30 PM.
#7
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
This is a pretty good deal considering I paid my mechanic $300 in labor to disassemble and inspect the engine to ensure it'll hold up for an FI biuld-out. In case anyone on this thread is in the DC area, I had Frank at Hill's Garage tear it down and scrutinize everything. He's a stand-up guy and has superior mechanical knowledge about the G35.
Trending Topics
#8
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Bump.
Also, If you need some internals, I've got top-notch pistons and rods available as well. BRAND NEW Cosworth connecting rods (paid ~$1450), and BRAND NEW Wiseco Extreme-Duty pistons (paid ~$1000).
Also, If you need some internals, I've got top-notch pistons and rods available as well. BRAND NEW Cosworth connecting rods (paid ~$1450), and BRAND NEW Wiseco Extreme-Duty pistons (paid ~$1000).
#9
Please review the classified posting rules under "Required Content"
Thread is locked until changes are made.
When you are ready to revise the original post;
Goto the top of the thread select "thread tools > Open thread"
Please make corrections ASAP, before the thread has to be deleted.
Thanks
Note: no Feeler threads
Thread is locked until changes are made.
When you are ready to revise the original post;
Goto the top of the thread select "thread tools > Open thread"
Please make corrections ASAP, before the thread has to be deleted.
Thanks
Note: no Feeler threads
#13
Join Date: Dec 2005
Location: Montgomery County, MD
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Guess I should say, the internals I referenced above are pretty high-end... they're posted for sale in another thread in the local NGC (NationalGClub) classifieds:
https://g35driver.com/forums/nationa...rt-series.html
https://g35driver.com/forums/nationa...rt-series.html
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
Frostbite91
Audio, Video & Electronics
5
08-20-2015 07:20 PM