bigc
Wings Nation
close
- Join DateFeb 2007
- LocationSoCal
- Posts:7,931
-
iTrader Positive Feedback100
-
iTrader Feedback Score(59)
-
Likes:1,267
-
Liked:626 Times in 456 Posts
**** S O L D *****
Up for sale is a used, 6/4 Rotora big brake kit.
The calipers were powdercoated dark candy red and were rebuilt after the powdercoat by Rotora in Chino, CA. The kit includes Rotora brake lines and 355mm two-piece, floating rotors. These brakes worked fine for me, but I strongly recommend the new buyer do some maintenance on the kit before installing (see below). The kit is priced accordingly.
Recommended Maintenance: I bought this kit used from another forum member. I noticed that there was a slight wobble which indicates the rotor rings may be warped. I was very annoyed that the seller didn't indicate this, so I'm being up front about it. The rotors are two-piece and the iron rings can be replaced easily so I recommend the new buyer replace at least the rings on the front rotors. Also, I reused the crush washers on the brake lines (big no-no, I now know that) so the new owner should install new crush washers when installing the lines into the calipers. Crush washers can be had for just a few bucks.
Price is $1,600 picked up in the LA area. I will not ship these because I want the buyer to inspect them first. I may drive up to Norcal for work at the end of the month so I could also do a local sale there too.
FAQ
Will these work on a first gen G sedan or 350z? Yes, I believe the brackets are the same. Double check with Rotora to be sure.
How are the brake pads? See pics below. Pads were replaced when I bought the kit and are in good condition.








This is why you don't re-use crush washers
Everything was fine after I stopped being cheap and replaced the washer.












Up for sale is a used, 6/4 Rotora big brake kit.
The calipers were powdercoated dark candy red and were rebuilt after the powdercoat by Rotora in Chino, CA. The kit includes Rotora brake lines and 355mm two-piece, floating rotors. These brakes worked fine for me, but I strongly recommend the new buyer do some maintenance on the kit before installing (see below). The kit is priced accordingly.
Recommended Maintenance: I bought this kit used from another forum member. I noticed that there was a slight wobble which indicates the rotor rings may be warped. I was very annoyed that the seller didn't indicate this, so I'm being up front about it. The rotors are two-piece and the iron rings can be replaced easily so I recommend the new buyer replace at least the rings on the front rotors. Also, I reused the crush washers on the brake lines (big no-no, I now know that) so the new owner should install new crush washers when installing the lines into the calipers. Crush washers can be had for just a few bucks.
Price is $1,600 picked up in the LA area. I will not ship these because I want the buyer to inspect them first. I may drive up to Norcal for work at the end of the month so I could also do a local sale there too.
FAQ
Will these work on a first gen G sedan or 350z? Yes, I believe the brackets are the same. Double check with Rotora to be sure.
How are the brake pads? See pics below. Pads were replaced when I bought the kit and are in good condition.








This is why you don't re-use crush washers
Everything was fine after I stopped being cheap and replaced the washer.











bigc
Wings Nation
close
- Join DateFeb 2007
- LocationSoCal
- Posts:7,931
-
iTrader Positive Feedback100
-
iTrader Feedback Score(59)
-
Likes:1,267
-
Liked:626 Times in 456 Posts
i hate to see them go...i put so much effort into this kit that i didn't want to sell them. i just can't justify keeping 2 extra sets of brakes in my house!
CandlestickPark
ill Sedan
close
- Join DateJun 2007
- LocationLong Beach, SoCal
- Posts:23,261
-
iTrader Positive Feedback100
-
iTrader Feedback Score(87)
-
Likes:1,230
-
Liked:2,688 Times in 1,449 Posts
BUMP for a sick BBK and an awesome price! GLWS Chris.
Registered User
Chris, you got PM
Registered User
I wish I had some cash for this as well. These are sick, GLWS
Registered User
SDGenius
Registered User
close
- Join DateJan 2008
- LocationOside, SoCal
- Posts:12,810
-
iTrader Positive Feedback100
-
iTrader Feedback Score(15)
-
Likes:1,719
-
Liked:911 Times in 608 Posts
Free Bump DOPE price, anyone who's planning on Ake's in the next month or two should get these instead
GreenGoblin
The goblin resurrection
close
- Join DateOct 2006
- LocationIn my garage
- Posts:25,863
-
iTrader Positive Feedback100
-
iTrader Feedback Score(66)
-
Likes:173
-
Liked:187 Times in 95 Posts

Florida G35 Club, General Member
Holy Macaroni. Even with the suggested replacements... that is a WICKEDLY CHEAP PRICE!
I sold a Rotora 6 pot front kit for $1500 plus shipping!
These will go so fast
I sold a Rotora 6 pot front kit for $1500 plus shipping!
These will go so fast

