WTB: HELP!!! Need stock plenum bolts... but where? - G35Driver

Feb 9, 2010 | 09:04 PM

bigdano

Thread Starter

Registered User

iTrader: (2)

Joined: Apr 2009

Posts: 305

Likes: 1

From: Saint Louis

HELP!!! Need stock plenum bolts... but where?

Guys I need a set of stock plenum bolts.. I already took out my spacer and now my upper plenum is just sitting there waiting to be bolted down. Does anybody know where I can get a set of bolts or does anybody wanna hook me up?

Please help me out I can't drive til' I get these bolts!

Dan

Feb 9, 2010 | 10:12 PM

Rambo

Registered User

iTrader: (9)

Joined: Sep 2009

Posts: 884

Likes: 12

From: Cincinnati, OH

try a dealer. Should not be to expensive.

Feb 9, 2010 | 10:59 PM

smokincoupe

Registered User

iTrader: (4)

Joined: Sep 2009

Posts: 293

Likes: 0

From: georgia

i need the same bolts someone help us out

Feb 10, 2010 | 12:06 AM

SxExCx

Former G35driver Vendor

iTrader: (307)

Joined: May 2005

Posts: 9,562

Likes: 458

From: SoCal

go to any autoparts store. You need to count how many of each (3) lengths of M6 bolts and just buy singles. It should cost $10-15.

Feb 10, 2010 | 11:16 AM

blueG1

Registered User

iTrader: (20)

Joined: Sep 2006

Posts: 569

Likes: 0

From: hollywood, Florida

hey guys, does anyone know what bolt i need to install a 5/16 motordyne spacer besides the ones they sell....

Feb 10, 2010 | 03:04 PM

bigc

Wings Nation

iTrader: (59)

Joined: Feb 2007

Posts: 7,931

Likes: 626

From: SoCal

you can get the bolts from any decent hardware store. i copied the stuff below from a thread i made over on my350z.com.

Quote:

Originally Posted by - bigc -

There are a bunch of threads on here asking for the sizes of the OEM plenum nuts & bolts. There's some info in the FSM, but, surprisingly, even Nissan's fast system doesn't have the complete specs. Anyway, the OEM sizes are below - add 8-10mm if you're running a 5/16" plenum spacer.

Intake Manifold Collector (Upper)

Bolts 1, 3, 6, & 9 = M6 x 1 x 60mm (red)
Bolts 2, 4, & 5 = M6 x 1 x 45mm (yellow)
Bolts 7, 8, 10, 11, 13 - 16, & 18 = M6 x 1 x 25mm (green)
Nuts 12 & 17 = M6 (green; these nuts & studs are sometimes replaced with M6 x 1 x 25mm bolts in aftermarket applications)

Intake Manifold Collector (Lower)

Bolts 1-6 = M6 x 1 x 70mm (blue)
Nuts 7 & 8 = M6 (violet)

hopefully this helps someone who wants to go back to stock, but has misplaced their OEM bolts.

Feb 10, 2010 | 03:05 PM

bigc

Wings Nation

iTrader: (59)

Joined: Feb 2007

Posts: 7,931

Likes: 626

From: SoCal

Quote:

Originally Posted by blueG1

hey guys, does anyone know what bolt i need to install a 5/16 motordyne spacer besides the ones they sell....

the motordyne install guide lists the sizes of the bolts you'll need. you can pick them up from a local hardware store that carries longer metric bolts.