FS: Brand New SVRTechnologies Solid Motor Mounts
Joined: Oct 2008
Posts: 139
Likes: 1
From: Long Island, NY
Brand New SVRTechnologies Solid Motor Mounts
I purchased these about a year ago with the intention of installing them in my own personal car but I have yet to install them. Our shop has started production of our own solid motor mounts and as is such I want to run no other mount than ours.
I purchased these for about $130 shipped since they were already out of production at the time of my purchase. I wanted these mounts over the other readily available mounts on the market due to the fact that without the use of the included spacers they lower the entire motor by about .25". With the use of the spacers the engine assembly sits at stock height.
Here was the description off of their old website:
Here is the thread my350z.com about their introduction:
http://my350z.com/forum/engine-and-d...or-mounts.html
My price for these is $105 shipped in the lower 48 states [Price is Firm].
Paypal address is Kwame@z1auto.com
I purchased these for about $130 shipped since they were already out of production at the time of my purchase. I wanted these mounts over the other readily available mounts on the market due to the fact that without the use of the included spacers they lower the entire motor by about .25". With the use of the spacers the engine assembly sits at stock height.
Here was the description off of their old website:
SVRTechnologies
Solid Motor Mounts
Solid motor mounts will help get rid of drivetrain losses due to flex and give the driver more solid control over deceleration, throttle input, and clutch engagement. Mounts are made from 1.75" dom tubing with 3/16" welded ends. Kit comes with 7/16" grade 8 bolts with grade 8 nylock nuts and grade 8 washer. Shims are also included to create the correct clearance around the steering shaft (some turbo kits are closer than others and need to be checked before driving). With no shims installed, the motor is also dropped roughly 1/4" allowing the use for the larger 1/2" intake spacers and stock strut bar. These are a must for any high hp or competitive effort.
price- $115 shipped (price excludes international shipping)
Solid Motor Mounts
Solid motor mounts will help get rid of drivetrain losses due to flex and give the driver more solid control over deceleration, throttle input, and clutch engagement. Mounts are made from 1.75" dom tubing with 3/16" welded ends. Kit comes with 7/16" grade 8 bolts with grade 8 nylock nuts and grade 8 washer. Shims are also included to create the correct clearance around the steering shaft (some turbo kits are closer than others and need to be checked before driving). With no shims installed, the motor is also dropped roughly 1/4" allowing the use for the larger 1/2" intake spacers and stock strut bar. These are a must for any high hp or competitive effort.
price- $115 shipped (price excludes international shipping)
http://my350z.com/forum/engine-and-d...or-mounts.html
My price for these is $105 shipped in the lower 48 states [Price is Firm].
Paypal address is Kwame@z1auto.com
Thread
Thread Starter
Forum
Replies
Last Post