I put on a complete set of Brembos so the OEMs have to go. A great upgrade if you have the smaller 03'-04' brakes, which was one of the biggest complaints about the early models. From a 2006 coupe with 25k miles.

Front 2 piston calipers, 12.6 inch diameter rotors
Rear 1 piston, 12.1 inch diameter rotors

All 4 rotors turned (and within specs.)

Front pads 0.3 inches
Rear pads 0.2 inches

Complete set of brake lines.

Mounting bolts included.

All you need is some brake fluid.

$500.00 plus shipping using Paypal or $425 locally in Atlanta (cash).

PM if you are interested.

 

Bump for some brakes.

 

Great upgrade, let me know if you are interested.

 

would you part out the rotors and pads, shipped to 19406?

 

Will these fit 2006 Sedan 6mt?

 

^^ I think you have those already.

'05+ Sedan and Coupe, '06 Sedan X
Front: 12.6-inch X 1.1-inch power-assisted vented disc - 2 pistons
Rear: 12.1-inch X .63-inch power-assisted vented disc - 1 piston

Good upgrade for 03/04, though.

 

Would this be a straight bolt on for an 04 coupe or would I need brackets?

 

plug and play for you

 

It's a straight bolt-on, but you do need the brackets too. Should come with them.

 

Thanks for the info Gents, so tadmcmichael, are the brackets included?

 

willing to part out the rear rotors?

 

Should be, since they're in the pictures.

 

Yes, everything is included. All brackets, bolts, brake lines, pads, shims, calipers, rotors, and pads. Great upgrade (assuming you are an automatic coupe with the small brakes?)

 

what about for an 04 sedan 6MT?

 

this upgrade will fit all models from 03-pre june 05 models this is a simple plug and play upgrade i have done this already but what you will have to do is either A, take off the brake dust shield or cut it like i did to mine
but this will fit