FS[NorCal]: Work Varianza T1S - (4) 19x8.5 +38; O-Disk

 
Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 15, 2010 | 02:29 AM
  #1  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Work Varianza T1S - (4) 19x8.5 +38; O-Disk

SOLD!

Please close this thread.


I've had these rims since 3/2007 and after three years it's finally time to let them go. Here are the specs:

Work Varianza T1S
  • (4) 19x8.5"
  • +38mm offset
  • O Disk
  • Machine Silver Polish














I have to admit, it's a fairly conservative setup, but the sizes are great for sedans with unrolled fenders and G35X's. Another plus is the ability to rotate your tires if you use same size tires. Also, the "O-Disk" allows for the largest lip size Work has in that offset.

As far as the current condition, there is some wear and tear on each of the rims. Each rim has some light scratches on the clear coat from normal daily use.










There's also a couple curb marks on two of the rims.







Two of the rims have slight bends; although none of the rims leaked air. Bend on the inner lip of one of the rims:







And on a different rim, a slight bend on the outer lip:







My asking price is $1,100 + (shipping + paypal fees, if applicable). I was hoping to sell these quick and didn't want to wait to have these fixed and repost them again. So with that, I'm lowering the price for now. I'm located in the Bay Area, CA and would prefer selling to someone local if possible.

Thanks for looking!
 

Last edited by bert039; Apr 26, 2010 at 05:25 PM.
Old Mar 17, 2010 | 10:41 AM
  #2  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
bump
 
Old Mar 17, 2010 | 04:14 PM
  #3  
crashnburn's Avatar
Registered User
iTrader: (14)
Joined: May 2006
Posts: 2,660
Likes: 12
From: florida
looked good til i saw the bends..been there done that and not doin it again.. clean wheels though
 
Old Mar 17, 2010 | 08:15 PM
  #4  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
It's really not that bad, I believe the barrels are forged. The tires are already off and it's definitely fixable at any rim shop. I just don't want to take the time or the hassle to do it.

If you were serious about the rims PM me. Maybe we can work something out.
 
Old Mar 20, 2010 | 01:39 AM
  #5  
terfer's Avatar
Registered User
Joined: Jan 2008
Posts: 120
Likes: 3
Any pics of them on a car?
 
Old Mar 23, 2010 | 04:56 PM
  #6  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Some pics from when I first put them on. Not the best pictures, but hopefully it'll give you some idea of how they look in terms of fitment.







 
Old Mar 23, 2010 | 05:01 PM
  #7  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Oh and the tires at the time of the pics were 245-40-19. I later put on 245-35-19 and lowered the car a tad more and it looked a lot more aggressive. No pics of that though
 
Old Apr 6, 2010 | 01:41 AM
  #8  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
BUMP

New lowered price, I really want to get rid of these now. My asking price is $1,250 + (shipping + paypal fees, if applicable).

I really don't want to wait to have these fixed and repost them. So with that, I'm lowering the price for now.
 
Old Apr 6, 2010 | 08:42 PM
  #9  
DrGeeMD's Avatar
Registered User
Joined: Dec 2008
Posts: 989
Likes: 0
From: Columbus, Ohio
I have an 07X and and looking for a non-staggered setup. They aren't very aggresive but I could live with that. And in fact, I was looking into T1S's, but the bends are killing me. Otherwise, I would likely buy these for that price.
 
Old Apr 7, 2010 | 02:06 AM
  #10  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
The bends are unfortunate, but they are absolutely repairable and priced accordingly. You're literally saving around $1000 from what any vendor on this site charges for these rims. Please let me know.
 
Old Apr 7, 2010 | 01:08 PM
  #11  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Might have a potential buyer?

But just in case, I wanted to note that I'll throw in the plastic hub rings for free as well.
 
Old Apr 9, 2010 | 01:05 AM
  #12  
gc86's Avatar
Registered User
Joined: Sep 2008
Posts: 135
Likes: 0
consider a trade for a set of 19" OEM RAYS painted graphite? with TPMS and centercaps? sent you a pm with pictures, I'm also in the Bay Area near SFO.
 
Old Apr 9, 2010 | 03:13 AM
  #13  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Thanks. The painted OEMs look good, but I'm trying actually trying to de-mod my car so I can sell it.

Plus, I was hoping to get some spending cash for vegas
 
Old Apr 26, 2010 | 12:22 PM
  #14  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Still for sale. $1,100 + (shipping + paypal fees, if applicable)
 
Old Apr 26, 2010 | 05:23 PM
  #15  
bert039's Avatar
Thread Starter
|
Registered User
iTrader: (13)
Joined: Apr 2005
Posts: 1,184
Likes: 1
From: San Jose, CA
Finally sold these, thanks all.
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
911Turbo
19 Inch
10
Aug 24, 2016 08:31 AM
EPG35
G35 Cars
4
Aug 16, 2015 04:52 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:02 AM.