Nothing to see here folks.

======== sold items below ========

Eibach Pro-Kit (F+R pairs)

http://www.gshack.org/misc/aEibach01.jpg
http://www.gshack.org/misc/aEibach02.jpg

Up first is a brand new set of camber arms, with toe bolts (L+R pair). I bought them from a vendor here. I'm going a different route and won't need these. It's literally brand new, only took it out of the box for photos.
Sold
http://www.gshack.org/misc/aG35Camber.jpg
http://www.gshack.org/misc/aG35Camber2.jpg

 

What's the part number on the springs? The Ichiba camber kit is posted in the wrong forum - that's a 1st gen kit.

 

hows the ichiba compared to SPC?
Does this fit my 05 coupe?

 

dbl post.

 

SPC is identical to the Ichiba kit, just painted black.

 

PM'ing... I'll take the rear kit.

 

I don't think the rear kit will fit Aeson's car. If it doesn't I'll take it. I live in Canada, but will compensate the additional shipping cost. PM me and we can discuss further.

 

Ichiba does offer a kit for the v36 sedans. As long as it is the right part, it will fit on 07+ sedans.

Mike.. GLWS!

 

Ichiba lists the same part number for the V35, V36, 350Z, and 370Z. Clearly this is incorrect on their part. SPC made a different kit for the V36 and 370Z. So I doubt it will fit the newer cars.

 

That's what I thought. Payment in hand for the kit.
Aidan

 

One of the members here, Adrian (2GorNot2G) is running the Ichiba rear camber kit on his V36 sedan. Maybe you can PM him to confirm..

 

That would be great if the 1st gen camber parts fit the 2nd gen car, but if that was the case, why would SPC develop a whole new kit for the 2nd gen cars?

 

Thanks for the interests and comments guys. Aidan, there are two people ahead of you but i will certainly let you know if it falls through.

I checked with Charles from B2 (the vendor here) who confirmed it fit the 2nd gens. As for SPC, i always thought they had two part numbers because one kit had the toe-bolts, the other without. No?

 

The box shows 6383.140.
Springs are 6383.001 and 6363.002

Thanks for the interest.

 

The SPC camber kit has camber arms and toe bolts. 72260 for 2nd gen and 72050 for 1st gen.