FS: Endless 14" 6 pot BBK Front Kit SOLD
Joined: Dec 2002
Posts: 1,477
Likes: 0
From: Beaverton Oregon
FS: Endless 14" 6 pot BBK Front Kit SOLD
I'm looking into a new car so...
*This is the front brake kit only* Brakes are in great condition. About <1mm wear on the rotors and 1-2mm of wear on the pads. I put a straight edge across the entire rotor (including the part that isn't touched by the pads and there is no ridge or gap.) I've had these for a little over a year now and my driving is almost exclusively highway. (My stock rear brembo pads are down only 2mm total for over 31K miles on the odometer.) That kinda tells you how hard I am on the car. I've had the Endless kit for about 17K miles now.
The rotors are slotted and the calipers are forged for strength and have 6 staggered pistons.
The calipers are custom gold which is a little lighter than the brembo golds. The rotor hat is fairly close to the color of the stock brembos.
The kit comes with stainless lines and an extra set of Endless CC-R racing pads. I got this kit for HPDE's but I never tracked it. The CC-R pads are brand new in the box. I've never tracked the car with these brakes.
I paid $4100 from adam@z1auto (vendor on my350z) with the extra set of pads. There was also an extra charge for Gold calipers back then. I'm looking for $2800 + actual shipping costs (have a UPS account.) *Price is reduced to $2700 shipped with insurance. Insurance is optional but highly recommended. All of the components will be shipped in their original packaging. Postal Money order or Cashier's check from a well-known bank preferred. Paypal is fine if you want to pay the 3%.
Here's a link to the imagestation album:
http://www.imagestation.com/album/pi...?id=2134520251
Here's a link to the endless site with the exact kit:
http://www.endlessusa.com/products/p...044&cid=4&pg=6
I bedded them in properly and I've never heard 1 squeek from them. No shimmy while braking either. They are absolutely solid.
If you're local (Portland Oregon), which I prefer so you can inspect them personally, I will even help you install them for a reasonable labor charge.
*This is the front brake kit only* Brakes are in great condition. About <1mm wear on the rotors and 1-2mm of wear on the pads. I put a straight edge across the entire rotor (including the part that isn't touched by the pads and there is no ridge or gap.) I've had these for a little over a year now and my driving is almost exclusively highway. (My stock rear brembo pads are down only 2mm total for over 31K miles on the odometer.) That kinda tells you how hard I am on the car. I've had the Endless kit for about 17K miles now.
The rotors are slotted and the calipers are forged for strength and have 6 staggered pistons.
The calipers are custom gold which is a little lighter than the brembo golds. The rotor hat is fairly close to the color of the stock brembos.
The kit comes with stainless lines and an extra set of Endless CC-R racing pads. I got this kit for HPDE's but I never tracked it. The CC-R pads are brand new in the box. I've never tracked the car with these brakes.
I paid $4100 from adam@z1auto (vendor on my350z) with the extra set of pads. There was also an extra charge for Gold calipers back then. I'm looking for $2800 + actual shipping costs (have a UPS account.) *Price is reduced to $2700 shipped with insurance. Insurance is optional but highly recommended. All of the components will be shipped in their original packaging. Postal Money order or Cashier's check from a well-known bank preferred. Paypal is fine if you want to pay the 3%.
Here's a link to the imagestation album:
http://www.imagestation.com/album/pi...?id=2134520251
Here's a link to the endless site with the exact kit:
http://www.endlessusa.com/products/p...044&cid=4&pg=6
I bedded them in properly and I've never heard 1 squeek from them. No shimmy while braking either. They are absolutely solid.
If you're local (Portland Oregon), which I prefer so you can inspect them personally, I will even help you install them for a reasonable labor charge.
Last edited by al503; Apr 12, 2006 at 05:23 PM.
Joined: Dec 2002
Posts: 1,477
Likes: 0
From: Beaverton Oregon
Originally Posted by Moog
man al503...i would sooooo love these brakes...just throw them in the package w/ the GReddy exhaust, lol
I am reducing the price though to $2700 shipped with insurance.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM