thx

 

Anybody know wuts the page to get them from nismo

 

http://www.parts-express.com/pe/psho...number=002-2.2

 

Nice. I will be doing this Really soon.

 

Anyone got photos of where to plug the resistors? Thanks

 

Okay pleas dont get on me for this... I dont want the end result of me NOT asking to be a airbag to the face... Does it matter which side you shove the resistor in? Like Red to the red wire and gold to the ground or does it not matter at all?

 

Bump on this question. I got the resistors in I am just waiting on this to shove them in.

 

error

 

It should just bridge the two wires in the connector.

 

Thats what I was thinking. It doesnt matter but I was just checking.

 

I have a 05 6mt and took the resistors and jammed them in all the way then did the reset procedure and the light is still there. Any ideas?

 

Yes. The resistor has to go into the smaller holes. I don have mine here to double check it all. ALSO I read that the resistor lines should be red black gold gold. thats a 2 ohm resistor. red r2.2 with 5%....

 

I got the airbags in both seats to stop throwing a code but I still have a code for the passenger airbag cause of the pressure sensor in the stock seat. Any idea how to get rid of that or trick the system into thinking there is always someone sitting there

 

https://g35driver.com/forums/audio-v...or-bypass.html

 

I've tried soo many times with these resistors and still can't get the damn airbag light off. Driving me crazy!