DIY 07 Altima engine START/STOP button in 06 350Z
Guest
Posts: n/a
DIY 07 Altima engine START/STOP button in 06 350Z
I like the look of the 2007 Altima engine START/STOP button and decided to retrofit one into my 2006 350Z 6MT. I had to modify the start button assembly itself then I built a relay control circuit that controls two Bosch 30A SPDT automotive relays, one of which controls the "START" function and the other which controls the "STOP" function. A special harness was made to tie the button and control box into the factory ignition switch harness. This does not have the "keyless" capabilities of the 2007 Altima but it looks real nice, OEM even. I placed the button on the center console above and to the left of the 6-speed shifter.
Video:
http://video.google.com/videoplay?docid=-1715882777329947104
The original development thread w/ pics:
http://www.my350z.com/forum/showthread.php?t=268183
Video:
http://video.google.com/videoplay?docid=-1715882777329947104
The original development thread w/ pics:
http://www.my350z.com/forum/showthread.php?t=268183
Joined: Feb 2006
Posts: 13,068
Likes: 101
From: Southern Cali --> 818
Nice project.
Anyway this could be done as a true "keyless" mod?
I don't think I would go through the trouble of making a push-to-start project if it still involved a key.
.
Anyway this could be done as a true "keyless" mod?
I don't think I would go through the trouble of making a push-to-start project if it still involved a key.
.
Guest
Posts: n/a
Originally Posted by skaterbasist
Nice project.
Anyway this could be done as a true "keyless" mod?
I don't think I would go through the trouble of making a push-to-start project if it still involved a key.
.
Anyway this could be done as a true "keyless" mod?
I don't think I would go through the trouble of making a push-to-start project if it still involved a key.
.
Joined: Feb 2006
Posts: 13,068
Likes: 101
From: Southern Cali --> 818
Originally Posted by Greg'Z33
Probably could be done but it's far more than I'm interested in trying to attempt.
Very cool project though.
.
Registered User
Joined: Feb 2005
Posts: 71
Likes: 0
I talked to my friend in Nissan Indonesia yesterday about this idea of true 'keyless' mod for my car... and my friend told me that it's do able.... what we need is the module from Nissan TIIDA or Versa in USA....
In Indonesia Nissan TIIDA come with that start/stop button with keyless capability.... but at the moment my main concern is I still have to use my original key if something wrong with the module and the key that come with the TIIDA module cannot be program to work on standard key hole in skyline...
In Indonesia Nissan TIIDA come with that start/stop button with keyless capability.... but at the moment my main concern is I still have to use my original key if something wrong with the module and the key that come with the TIIDA module cannot be program to work on standard key hole in skyline...
Trending Topics
Registered User
Joined: Jun 2008
Posts: 525
Likes: 1
From: Cordova, TN
it could possibly work if it were possible to move the ing cyl under the dash and keep a key in it in the On position. Then the Start/Stop button would be usable without using another key...
I say this without thinking through the impact on the battery, lighting, keyless entry... etc...
I'm sure SOMEbody out there can make this work...
I say this without thinking through the impact on the battery, lighting, keyless entry... etc...
I'm sure SOMEbody out there can make this work...
Thread
Thread Starter
Forum
Replies
Last Post
yassy
G35 Sedan V35 2003-06
3
Aug 9, 2015 07:31 PM
