What size amp would you use to push 2 JL 10W6V2's? I'm currently running a single 10W6V2 with a JL 500/1 amp, but want to add a 2nd sub..

Thanks

 

just get a 2nd 500/1....

 

or a 1000/1..

 

I would try it with just the 500/1 first. If you double your cone area with the same amount of power, you should see some gain in dB, so it may be enough for you. I would try this first and then decide if you need to upgrade

 

The 500/1 will run it.