Any tips for installing this stuff?
#1
Join Date: Nov 2003
Location: MA
Posts: 2,340
Likes: 0
Received 0 Likes
on
0 Posts
Any tips for installing this stuff?
I'm getting my PS2, Backup Camera, and my NAV HACK from Mechee installed next week.
I got the tvandnav2go module from Dominic.
I have a 2006 coupe 5at with nav.
I'm planning on installing the PS2 in the glove box and putting the backup camera in the spot of my intelligent key button in the rear driver's side taillight.
Any tips or diys for the PS2?
Any suggestions would be appreciated. (I'm not doing this, my bodyshop is going to do this for me.)
I got the tvandnav2go module from Dominic.
I have a 2006 coupe 5at with nav.
I'm planning on installing the PS2 in the glove box and putting the backup camera in the spot of my intelligent key button in the rear driver's side taillight.
Any tips or diys for the PS2?
Any suggestions would be appreciated. (I'm not doing this, my bodyshop is going to do this for me.)
#2
Registered User
iTrader: (20)
Join Date: Aug 2005
Location: MA/CT
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
all of that should be fairly simple. dremel space for the rear plugs of the ps2 and run the wiring behind the glovebox / headunit. backup camera gonna need to be careful on that cutting or you will need a new tailight haha. nav hack i beleive it is just splicing in some lines. should be easy as long as they are competent!
#3
i did all that you mentioned myself, over the course of a couple months - didnt get it alla t once, but its all very very simple if you search you can find many many diy guides out there. Hardest one you might find is the ps2...i know for a fact i posted a diy or at least a guideline of the tvnav2go and the pac unit, i did it all myself, saves you alot of money......unless bodyshop is gonna charge you like 100 bucks id do it myself.
Thread
Thread Starter
Forum
Replies
Last Post
Jiggerjuice
Brakes & Suspension
9
10-05-2015 02:33 PM