A/F gauge install
Joined: Dec 2007
Posts: 3,577
Likes: 12
From: South Florida
A/F gauge install
ive got the basic idea down, red to + , black to -, and white to the o2 senser. could it be this easy?? which wire am i going to splice into on the o2sensor... any help is greatly appreciated. thx
Edit: i just need to know which wire is the signal wire in the o2 sensor.
Edit: i just need to know which wire is the signal wire in the o2 sensor.
Last edited by MikeYo; Mar 29, 2008 at 09:25 PM.
Moog, since he has a 03 that means he should have a Narrow band AFR Gauge if he got a Wideband he will get into problems.
http://psedog.com/cars/fsm/g35/coupe/
To the OP, check the Factory Service Manual for the wires, and make sure your AFR Gauge is Narrow band, because the O2 Sensor in the G35 from 2004.5 become Wide band Instead of the Narrow band.
http://psedog.com/cars/fsm/g35/coupe/
To the OP, check the Factory Service Manual for the wires, and make sure your AFR Gauge is Narrow band, because the O2 Sensor in the G35 from 2004.5 become Wide band Instead of the Narrow band.
Joined: Dec 2007
Posts: 3,577
Likes: 12
From: South Florida
I just need to know which wire to tap into... I know where the o2 sensor is but I need to know if the signal wire is one of the two white wires... Helppppp
Thread
Thread Starter
Forum
Replies
Last Post
djreinx
Engine - Electrical
3
Dec 10, 2015 01:48 AM
TWASkyliner
G35 Coupe V35 2003 - 07
9
Aug 1, 2015 11:43 AM
