Is this a safe place for my amp?
#1
#4
The amp won't get too hot under the mat but you should address a few things first.
1. Mount the amp on a board that has been cut to fit in the rim. I had that done on a prior car and it worked fine.
2. The center part of the floor will no longer have support and will sag. that may not be a problem for you though.
3. Make sure you have enough slack in the wires, like silvernole said.
1. Mount the amp on a board that has been cut to fit in the rim. I had that done on a prior car and it worked fine.
2. The center part of the floor will no longer have support and will sag. that may not be a problem for you though.
3. Make sure you have enough slack in the wires, like silvernole said.
#5
Originally Posted by Gilley
The amp won't get too hot under the mat but you should address a few things first.
1. Mount the amp on a board that has been cut to fit in the rim. I had that done on a prior car and it worked fine.
2. The center part of the floor will no longer have support and will sag. that may not be a problem for you though.
3. Make sure you have enough slack in the wires, like silvernole said.
1. Mount the amp on a board that has been cut to fit in the rim. I had that done on a prior car and it worked fine.
2. The center part of the floor will no longer have support and will sag. that may not be a problem for you though.
3. Make sure you have enough slack in the wires, like silvernole said.
2. Right now the amp is pretty much flush with the tire, so the mats sit level. Although whatever I put in my trunk will be sitting on top of the amp
3. Theres enough
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post