Jl Audio W7
#16
#18
Originally Posted by bmpnride
IDMAX all the way... These subs really put out. I am going with a 10 in a modded 4080 box powered by a Zapco IForce amp (800 watts). These can be found for about $900. If you dont really need your trunk, go for the 12. You will be very pleased for half the cost.
The 12 doesn't need much room either. Recommended size is 1.3 cubes sealed.
#19
#20
Originally Posted by donpisto
IForce for 900 or the id max and iforce for that price? if it's just for the amp isn't that more than retail? lol.
The 12 doesn't need much room either. Recommended size is 1.3 cubes sealed.
The 12 doesn't need much room either. Recommended size is 1.3 cubes sealed.
#21
Ah, yeah I forgot about that. I looked at the one for the 10" and figured maybe some gutting can be done but that won't work. Unless he went with 2 10's (1 on each side), but then he'd need to get about 1,500 - 2k going to them and hopefully there wouldn't be any cancellation issues. One is plenty though. Some people tend to understimate what a single sub, even a single 10 could do. But the looks on people's faces are just priceless
#22
Originally Posted by donpisto
Ah, yeah I forgot about that. I looked at the one for the 10" and figured maybe some gutting can be done but that won't work. Unless he went with 2 10's (1 on each side), but then he'd need to get about 1,500 - 2k going to them and hopefully there wouldn't be any cancellation issues. One is plenty though. Some people tend to understimate what a single sub, even a single 10 could do. But the looks on people's faces are just priceless
#23
Originally Posted by donpisto
Sundown draws some pretty good current though doesn't it? Haven't heard the Icon, but from what i've heard from others its a great sub.
not much more current then your typical class d monoblock, maybe more then brutus cause it actually does rated power though, lol
#24
Probably would be better off finding someone who does custom work or fiberglassing. Fiberglassing doesn't seem to be too hard. For just one enclosure I'd pay the money for it, but for 2, I'd probably do myself...it's not like you can mess up either and materials aren't that expensive. Sanding is the part that takes the longest though.
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
02-26-2018 06:14 PM
DEMoLITIoN
Audio/Video/Electronics
8
04-20-2016 06:57 PM
FS[SoCal]: D/S 4080 Enclosure & JL Audio W6v2 10 inch
MrIP35
Audio/Video/Electronics
9
11-08-2015 10:47 AM
12w6v3, 12w7, 15w6, audio, c2k, california, craigslist, craigslistcom, craigslistorg, jl, prices, site, w7, wholesale, zapco