I wanted to get your opinions on this box...

I MEANT TO PUT 10w3 in the box.

- will fit 2 10" subs

- hole cutout is 9 1/8 "

- mounting depth is 8"

- internal airspace is 1.70f^3, mono chamber

- gold-plated terminals (which also accept banana plugs)

- professional paint in ANY color you want. We just need the paint code or color name.

- thick black or charcoal carpet on the back. (your choice)

- raised "infiniti" logo molded into the fiberglass


Not installed:



Installed:

 

should be good, if the airspace is listed correctly you will have about 1.5 cu. ft
after woofer displacement, which should work well for those subs

 

my last question is... they offer this as well if I wanted...

Add a center divider making each chamber 0.8 f^3

Would that be better?

here are the dimensions on the subs

Continuous Power Handling: 300 Watts
Coil Resistance: 4 ohm
Xmax (one-way, linear): 0.550 in. / 14.0 mm
Driver Displacement: 0.049 cu. ft. / 1.39 liters
DC Resistance: 7.240 ohm
Efficiency (1W/1m): 85.22 dB SPL
Mount Depth: 5.93 in. / 151 mm

 

it really won't make a huge difference, a common chamber will be fine. they should perform well in that enclosure