What do I need for my install?
What do I need for my install?
I just picked up a new 6mt coupe. I have a 4 channel pioneer amp and 12" sub at my house that I had in my integra. I don't want to use it any more in there becuase of the weight. I ordered a Line Level Converter with gain control and some good rca's today but I don't know what else I need to do the install. Also, if someone could point me to a good DIY on how to do the install then that would be great. I think I can just tap into the wires that go to the factory amp for my rear speakers but I'm not sure.
Thanks for the help.
Thanks for the help.
Re: What do I need for my install?
A couple questions for you about your system.......
1. Have you read any of the threads/posts in this forum???????
2. See #1
1. Have you read any of the threads/posts in this forum???????
2. See #1
Re: What do I need for my install?
Go to FAQ/DIY Forum and look for a post called "Adding amps and EQ"
Black on Black 5AT Coupe, Navi
Falken Koblenz 19x8.5 F 19x9.5 R
Falken FK-451 245/35 F 285/35 R
HKS Legamax Exhaust
350Z Duct
Stillen Hi Flow
7 Wire Hypergrounding Kit
Black on Black 5AT Coupe, Navi
Falken Koblenz 19x8.5 F 19x9.5 R
Falken FK-451 245/35 F 285/35 R
HKS Legamax Exhaust
350Z Duct
Stillen Hi Flow
7 Wire Hypergrounding Kit
Re: What do I need for my install?
I thought sticky posts were supposed to be "USEFUL"...... lol
Dang, people...... I know some of you are newbies, but look around before you just post stuff. Practically everything you need to know about DIY on the dash kit and wiring is already on here.
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
Dang, people...... I know some of you are newbies, but look around before you just post stuff. Practically everything you need to know about DIY on the dash kit and wiring is already on here.
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
Re: What do I need for my install?
(roll eyes) lol.....
you're funny BAMA....
BTW, how's the PAC SWI-X working????? any pix of where you mounted the sensor?
doc
you're funny BAMA....
BTW, how's the PAC SWI-X working????? any pix of where you mounted the sensor?
doc
Re: What do I need for my install?
SWI-X works ok, but I still need to tweek it as the angle isn't exactly what I'm looking for.
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
288669-Image056b_small.jpg
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
288669-Image056b_small.jpg
Trending Topics
Re: What do I need for my install?
that's sweet Bama.......very stealth...
so you did have to run extra wire to that sensor huh?
was it worth it????
doc
so you did have to run extra wire to that sensor huh?
was it worth it????
doc
Re: What do I need for my install?
Yeah - I ran extra wire and put the SWI-X box under the steering column. I'll show pics later if I have time.... But it wasn't too hard. The angle is the hardest part...... more later......
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
The Bamadog
BAMADOG.COM
2004 G35 Coupe - Black/Black 6MT - Chrome 7-Spoke Wheels - Aero Kit & Package w/spoiler - Tint - Alpine System - Body Side Molding
Thread
Thread Starter
Forum
Replies
Last Post



