PAC AAI-NIS2 not working
Joined: Jan 2009
Posts: 28
Likes: 0
From: Pleasantville New Jersey
PAC AAI-NIS2 not working
I have an 04 Coupe with Bose sound system. I installed the PAC AAI-NIS2 unit, connected my iPod, and it does not work. When I push the SAT button all the display ends up saying is Anttena. Anyone have any idea why it is doing this? I have checked and made sure of all my connections were complete.
Last edited by Jaybird-runner; Jan 14, 2010 at 12:57 PM.
doesnt it have a switch for sat or no sat? you might have it in the wrong position.
also, sometimes you have to switch to another source like CD or FM, then do back to SAT2 (not SAT1) and the presets 1 and 2 will work.
also, sometimes you have to switch to another source like CD or FM, then do back to SAT2 (not SAT1) and the presets 1 and 2 will work.
Joined: Jan 2009
Posts: 28
Likes: 0
From: Pleasantville New Jersey
Thanks Tim, I tried switching it back and forth with no luck. I have also tried all sorts of combos with the buttons (switching from one source to another) and still it comes up Antenna.
After going to Zdayz, I decided I was eventually going to replace the whole OEM setup, and do away with the pac (which I mostly love any other time). When I was driving under tree cover, it would cut out. Since it's fooling the headunit into playing Sat content, if the Sat signal cuts out, so does the pac. When I pull into my garage and sat cuts out for a split second, the pac is muted as well. So, I'm thinking you must actually have an antenna issue... and I know from experience that it will not allow the pac to pass thru.
Thread
Thread Starter
Forum
Replies
Last Post




