hey i need a 03 g35 sedan radio bracket stock for my doubledin.

stock radio bracket .

 

No, you don't need a new bracket, the factory bracket holding your old radio is what you use to install it.

If, for some reason you don't have the factory bracket, you'll have to buy a new one, but you can't use this discussion forum to try and find one, you'll have to use the marketplace.

 

yea thats the problem i bought my car with a single din dash kit and it didnt come with the factory bracket. plus i cant post in the marketplace. by any chance do you know where i can get just the bracket or if you know anyone selling one? thanks

 

This should work fine http://www.ebay.com/itm/NEW-2003-200...-/330547608168

 

wow thanks alot! appreciate it. i hope it works out cause all i really need is the bracket ... if my car came with the stock one it would save a whole lot of trouble -____-

 

oh btw... my single din dash kit is aftermarket which i am tryna convert to double din by cutting off the middle piece. will that jdm double din bracket work? i can send you pictures..

i wanna make sure before ordering

 

Perhaps I wasn't clear, but there's no aftermarket single-din bracket. There's no factory single-din bracket. There's no aftermarket double din bracket. There is ONLY the factory radio bracket. You can mount a single-din in it easily, simply by drilling mounting holes in it. Unless somebody completely fabricated an entirely custom bracket or you're completely missing the radio mount, the factory bracket is there to put a double din into.

The same bracket that holds the radio holds also holds the center cubby hole and center console trim in place. Unless your dash currently looks like this, you have a factory bracket in there already:

 

unfortunetly all i am missing is that bracket to hold my double din. i dont know will it fit the dash kit i have. do you know if that jdm double din bracket from the link above will work? thanks

 

that E-Bay link, is mine,
and like I said, I don't really sell them that much, but if you need it, order it, and if it doesn't fit, as long as you don't damage it, I will take it back
~Phil~

 

haha wassup phil i was the one messaging you earlier through ebay.

i will order it hopefully it works out if not i will send it back. thanks

 

that's what you need, the question is "if" you really need it

 

i heard even with a oem bracket, it wont fit my dash kit?? why is that

 

The oem bracket works for DD's...not sure who told you that lie lol

 

works for me, but you should be good!
~phil~

 

So what is holding the radio you currently have in the car? Tape? Glue?

If it's any sort of metal bracket, it's that bracket you seem intent on purchasing.