When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
In case you guys are still looking (only a couple months after your post)
You can cut off your existing cable and connect it to the back of the metra.
Easiest thing to do is crimp/solder on something on the end and slot them onto each pin.
This is what I did for mine
In case you guys are still looking (only a couple months after your post)
You can cut off your existing cable and connect it to the back of the metra.
Easiest thing to do is crimp/solder on something on the end and slot them onto each pin.
This is what I did for mine
do you have a write up on how to do this, or maybe even a pin diagram.. bought the metra kit didn't recieved the cable.. your help would be much appreciated. I have search endlessly for info on this .
do you have a write up on how to do this, or maybe even a pin diagram.. bought the metra kit didn't recieved the cable.. your help would be much appreciated. I have search endlessly for info on this .
bumping this thread in case anyone did find a solution possibly. Having the same issue currently
