Hey guys,
Im sure some of you have seen the work we have done in regards to the omnifi mp3 controller in the cubbyhole cover. We are charging $500.00 for an exact replica of what we did here. This includes the labor involved in molding, fiberglassing, painting and return shipping to the customer. We charge $85 an hr and am only billing for 4 hrs work vs the 6-7.5hrs it really takes to complete the job from start to sending the unit off to the paint shop. Paint costs about $80 or so, and shipping is a flat rate of $40.

Now what i want to know is, are we charging too much? If so how much would you pay to have something like this or simular done? All comments are welcome.

 

I Would Pay 300.00

 

IMHO, $500 is way to much. I showed a guy a picture here at Custom Sounds, and he said it would only cost $200.

 

ouch!!!! does that $500 include the mp3 player too? cuz that seems a bit high to just attach the mp3 player controller onto the cubby hole door.

 

price seems outrageous for just the fabrication...i know...i too work at a stereo shop that does custom fabrication.

 

Looks great.

Whatever you do use a pricepoint. $249. $299. $349.

 

I think we're gravitating towards more of the $299 price point if we decide to go into mass production of these units. You're right, $500 is way too high. That price was based upon the amount of hours spent at $85 an hr. obviously that can not be used to determine mass production pricing. Thanks for the feedback guys. PM me or post if you have any other comments.