Ipod nano install completed 56k Warning
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 36
Likes: 0
Ipod nano install completed 56k Warning
Finally, completed my ipod nano using PAC thru the SAT radio.
I made a holder that glues my nano holder adapter and place it in the ashtray.
I made a holder that glues my nano holder adapter and place it in the ashtray.
Last edited by SkylineG35x; Oct 10, 2005 at 03:38 PM.
wow... that's tight. How did you get the "M" to fit so perfectly inside the mail envelope? I like your choice of alternating colors for the title, makes it very "Accepting" of "alternative" lifestyles.
Couldn't find the Nano anywhere though... guess that's why it's called a nano...
Couldn't find the Nano anywhere though... guess that's why it's called a nano...
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 36
Likes: 0
Trending Topics
Thread Starter
|
Registered User
Joined: Sep 2004
Posts: 36
Likes: 0
Basisly I follow the same instruction how to install the PAC from this website
http://g35ipod.com/installHW.php?skin=1, I ran the audio jack thru the ashtray. There a piece of metal clip you can bent it forward and feed the jack thru it.
I got one of the white cardboard that sells at walmart or office max and cut out a template of the ashtray and cut the inside shape of the nano dock adapter. you can see the picture below. that is how my first template looks like.
Then I vinly wrap and superglue the final template. The holder just sits in the ashtray, you can remove it anytime. once you put the nano on top of it and plugs in to your audio jack, it sits there and not move at all.
The holder cost me total of 6 bucks, that include Vinly, cardboard and superglue.
Also I got the PAC from x10.com for only 76 bucks include free shipping.
Ok, I added the photos in the yahoo album.
http://photos.yahoo.com/snakeye113
http://g35ipod.com/installHW.php?skin=1, I ran the audio jack thru the ashtray. There a piece of metal clip you can bent it forward and feed the jack thru it.
I got one of the white cardboard that sells at walmart or office max and cut out a template of the ashtray and cut the inside shape of the nano dock adapter. you can see the picture below. that is how my first template looks like.
Then I vinly wrap and superglue the final template. The holder just sits in the ashtray, you can remove it anytime. once you put the nano on top of it and plugs in to your audio jack, it sits there and not move at all.
The holder cost me total of 6 bucks, that include Vinly, cardboard and superglue.
Also I got the PAC from x10.com for only 76 bucks include free shipping.
Ok, I added the photos in the yahoo album.
http://photos.yahoo.com/snakeye113
Last edited by SkylineG35x; Oct 10, 2005 at 07:44 PM.
