I have a viper 791XV alarm on my car, and I bought a second 2-way remote. Now I need instructions on how to program it to my car. The instructions on the back are kind of vaque.

Anything will help.

THanks.

 

1. turn ign to on position
2. press valet button 1 time then press again and hold this time
3. siren will chirp once
4. press the unlock button on your new remote
5. you should then hear a confirmation from the siren and you are done, just make sure everything works after

 

So that will program everything? I thought I had to program each button individually?

Any other tips/info?

THanks.

 

that will default program it, if you have custom features you will have to do those seperately

*default is lock, unlock, remote start w/ org button and aux

 

Is that the way to program it, even without the remote start. I decided to install the remote start function.

I also have the trunk programmed for AUX. Do you know the way to program that one.

Thanks again.

 

if you program it like i said all of the features will be programmed, with the trunk pop you will just have to hold down the aux button til it pops.

 

Thanks CMAYER! It worked just like you said it would!

Here's a shot in the dark, but do you know how I can make the horn and headlights (stock alarm), activate when my VIper goes off?

The viper alarm isn't loud enough and it sounds like every other alarm, so I was hoping have the stock horn/lights go on with the viper siren/lights.

THanks again.