Autocross/Road SCCA Solo II Grand-Am Cup, JGTC , Procar SCCA Club Racing, Redline Track Events, Speed Trial, Speed Ventures

I need help!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 21, 2006 | 06:15 PM
  #1  
myG35ZX's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jan 2003
Posts: 788
Likes: 0
From: Chicago, Illinois
I need help!

I am looking for new track wheels. I like the rpf1 and rp03 from enkie. But the offsets available are not ideal. I would like 17" wheels; 8.5 in the front and 9.5 in the rear. Everyone here recommends 35/38 for the front and 45 for the rear. Help. Please.
 
Reply
Old Apr 22, 2006 | 09:08 AM
  #2  
timm's Avatar
Registered User
Joined: Jul 2004
Posts: 29
Likes: 0
What brakes are you running? If they're aftermarket you should get a template from the manufacturer to test fit for spoke clearance, or check with the vendor for fitment recommendations.

For reference, I'm running 17 x 9" +35 (5Zigens) with 275/40's all around for track wheels - no interference issues at all. Your front 8.5" +35 shouldn't be a problem but I can't comment on the rears.
 
Reply
Old Apr 23, 2006 | 09:45 PM
  #3  
SinCity350Z's Avatar
Registered User
iTrader: (2)
Joined: Apr 2005
Posts: 463
Likes: 0
From: North Las Vegas
How wide do you want to go on the tires? I know that you can fit 285s in the front and 315s in the rear with no fender mods by running an 18"x9.5-10" +30 wheel all around. You don't want that wide of tires unless you have some good power to back it up though.
 
Reply
Old Apr 24, 2006 | 05:19 PM
  #4  
myG35ZX's Avatar
Thread Starter
|
Registered User
iTrader: (2)
Joined: Jan 2003
Posts: 788
Likes: 0
From: Chicago, Illinois
I drive the sedan and would like to have 245 and 275's on 17's.
 
Reply
Old Apr 25, 2006 | 11:25 AM
  #5  
BlkG35FujiCoupe's Avatar
Charter Member Florida G35 Club
iTrader: (1)
Joined: Jan 2005
Posts: 129
Likes: 0
From: Miami, Florida
Originally posted by timm...
What brakes are you running? If they're aftermarket you should get a template from the manufacturer to test fit for spoke clearance, or check with the vendor for fitment recommendations.

For reference, I'm running 17 x 9" +35 (5Zigens) with 275/40's all around for track wheels - no interference issues at all. Your front 8.5" +35 shouldn't be a problem but I can't comment on the rears.
are you running those 17x9's with brembos? and is your car lowered at all? thanks
 
Reply
Old Apr 25, 2006 | 11:49 AM
  #6  
roneski's Avatar
Devil's Advocate
Joined: Apr 2004
Posts: 3,404
Likes: 0
From: Vegas
Originally Posted by timm
What brakes are you running? If they're aftermarket you should get a template from the manufacturer to test fit for spoke clearance, or check with the vendor for fitment recommendations.

For reference, I'm running 17 x 9" +35 (5Zigens) with 275/40's all around for track wheels - no interference issues at all. Your front 8.5" +35 shouldn't be a problem but I can't comment on the rears.
I'm running the exact same setup. They clear the brembos with plenty of room to spare. And I'm lowered a little over an inch. I even have a recent pic.

 
Reply
Old Apr 26, 2006 | 08:34 AM
  #7  
timm's Avatar
Registered User
Joined: Jul 2004
Posts: 29
Likes: 0
Originally Posted by BlkG35FujiCoupe
are you running those 17x9's with brembos? and is your car lowered at all? thanks
I have 13" Stoptech's all around, lots of spoke clearance and no lowering. The setup is very well balanced.
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:05 AM.