DIY: Clear Corners
#1
DIY: Clear Corners
Since I've been on driver I've received PMs from about 5 different people about how to install Clear Corners...
1. Pop the Amber Corner by simply tugging on it (gently). You'll be amazed at how easy it is to remove.
2. This is what it should look like...
3. Twist that gray piece (counter clockwise i believe) so it now looks like this...
4. Pull the gray connector out of the Amber Corner.
5. Get the Clear Corner in hand...
6. Put the gray connector into the Clear Corner - be sure to align the notches so that it goes in all the way.
7. Twist the connector (clockwise i believe) so it snaps back into place.
8. Snap the Clear Corner back into the bumper...
9. You're done...!
1. Pop the Amber Corner by simply tugging on it (gently). You'll be amazed at how easy it is to remove.
2. This is what it should look like...
3. Twist that gray piece (counter clockwise i believe) so it now looks like this...
4. Pull the gray connector out of the Amber Corner.
5. Get the Clear Corner in hand...
6. Put the gray connector into the Clear Corner - be sure to align the notches so that it goes in all the way.
7. Twist the connector (clockwise i believe) so it snaps back into place.
8. Snap the Clear Corner back into the bumper...
9. You're done...!
The following 3 users liked this post by Calvin:
#2
#3
#5
#7
Trending Topics
#9
#13
#15