DIY: Engine Bay Dress-Up Bolt/Washer Kits, NFSP Style (don't pay a fortune for bolts)
#46
I've been subbed to this thread for a while and I'm getting ready to order some bolts but just wanted to ask a question. I have a 5/16ths spacer so I'm planning to add 10 mm to each size right? Also, I'm not quite sure approx. how many of each size bolt I need. I'm planning to order some extras of each size of course but just don't want to order and not have enough of each. I have an 04 sedan AWD so I didn't know if anybody who has done this has a list of how many of each size they used so that I could have a shopping list, .
#48
Join Date: Apr 2009
Location: Tallahassee, FL (or thereabout)
Posts: 22,160
Received 851 Likes
on
639 Posts
Reread the original post. It has all the information for how many bolts you need and in what sizes.
Personally, I recommend getting quite a few extra 25 and 16mm lengths, because you can use them in lots of places and they don't cost much.
You might want to consider getting 1 or 2 extra 35mm lengths, I can't remember exactly how many there are around the plenum.
Personally, I recommend getting quite a few extra 25 and 16mm lengths, because you can use them in lots of places and they don't cost much.
You might want to consider getting 1 or 2 extra 35mm lengths, I can't remember exactly how many there are around the plenum.
#49
#50
#55
does anyone know where i can get anodized pink metal paint? been looking around online and all i could find was this...
http://www.amainhobbies.com/product_...pray-Paint-3oz
why cant duplicolor make a pink metalcast color?!?
http://www.amainhobbies.com/product_...pray-Paint-3oz
why cant duplicolor make a pink metalcast color?!?
#58