just had alignment done....issues
#1
Join Date: Aug 2006
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
just had alignment done....issues
well after putting on new wheels and H-tech spring along with '06 Z shocks/struts, i waited a week then went to get the alignment done today....
all wheels are in spec EXCEPT rear left camber, can't get it better than-2.0
i believe right side is -1.3
any ideas as to why?
i heard other people have had same issue
all wheels are in spec EXCEPT rear left camber, can't get it better than-2.0
i believe right side is -1.3
any ideas as to why?
i heard other people have had same issue
#2
I just posted something about this. I went to get an alignment today as well because my last one was not good. My right rear camber was the one that was at -2.1 and the left was -1.3. So instead of bying the rear camber kit, I went to another place first to get anohter alignment since I didnt think the guys I first used did a good job. I went to a place in Queens Village called papo's. What they did was bend my right rear camber arm just a little bitso that it could pull the wheel in a bit from the bottom. They have some kind of machine to do it and I watched them through the whole process. It definitely fixed the problem. Was able to get it down to -1.6.
#4
yeah, but I dont think it has anything to do with the camber in the rear, that is actually really good. As others have suggested, it might either be the toe cuz there is too much, or they did some kind of mistake by not aligning the wheels properly. The little bend actually did the job, and its totally safe since notthing was cut, just a little bend thats all.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM