I tried searching for the answer, but didn't come up with anything, so here it goes.

Apparently there's a new model of Hotchkis sways (with four adjustment holes instead of three.). Besides this difference, is there any other improvements?

Do you need collars for the new ones to fix the "squeaking"? Is the squeaking problem from the old ones still there?

 

i ordered a set of hotchkis sways approx 4 months ago from intense motorsports and i can verify that the front sway of the set comes with 4 holes due to the wieght difference of the g35 to the 350z. Also the need for collars is not needed as now they have wielded on collars to prevent the swaybar from sliding. everything else remains the same.

 

good info

 

yes this information is correct. i actually met the guy that fabs these for hotchkis in LA

 

Thanks for the info!

 

Just put plenty of the supplied grease on the bushings and you should be squeak free. I haven't had any squeaks out of mine.

 

Got mine on last week and like them a lot. Meechin (Street Image)said the extra hole is for the 06 application..

 

what do u mean for the 06 application firedawg?

 

For those with the new version of the Hotchkis sway bars, what are your stiffness settings?

 

medium-hared in the front / medium in the rear

 

I got mine a few months back. Along with my sways, they are dollar for dollar the best mods that I have done, until I go FI that is.