Anyone have any info/experience w/ Nissan Motorsports Adjustable sways?
Link: http://www.mynismo.com/products/?id=2793

Is Nissan Motorsports affilaited w Nissan and/or Nismo? Can anyone comment on the quality of their products?

 

nissan motorsports = nismo

 

So these are adjustable nismo sways?!? Update: Contacted the vendor: Apparently these sways are not recomended for stock exhaust setup b/c no bend to allow for exhaust pipe clearance (only recommended for true dual setups. So, it looks like the stillens seem to still be the best fit and bang for the buck for adjustable sways.

Anyone know if the stillen's set on med/med setting is as stiff/less stiff/or more stiff than the nismo non-adjustable sways?

 

These are Nismo (Don't you know the joke if Nissan Motorsports = Nismo what does Honda Motorsports equal? )and I can't comment on the difference with Stillen but will tell you I like my Stillen sways a lot!! Best bang for the buck mod IMO.

 

^ i like that joke never haerd it b4

 

LOL!!!!!!!!!!!!!!!!!!!!

 

Those swaybars are made for Nissan Motorsports USA by 350EVO. Do not purchase them for two reason's. The adjustable end links they come with are not reliable from my own experience. You can buy the same exact sway's direct from 350EVO and get adjustable end links from SPL for less money.

 

Nismo non adjustable sway's vs your oem 05 coupe sport suspension sway's.

Front +1% Rear +1.4%

Stillen's are adjustable so you can use them like your supposed to use sway's for, to fine tune at the limit handling to suit your setup and driver style allowing you to extract the most out of the car.

 

actually these arent "nismo's" sways..

 

Correct, they are made my Wright Tuning, aka 350EVO for Nissan Motorsports USA.

 

Nice, now i know who made my sways! thanks! wait...edit...i already knew haha I have a question though..the spl endlinks do they fit through the 350 evo front sways without "flipping" them??

 

They installed on my Hotchkis front bar without issue, exactly as the SPL direction's showed.

 

well the 350 evo's are really thick...so the instructions required me to flip the endlinks so that the thread actually clears the sway's hole...I was wondering if the SPLs threads are long enough...