Just bought barely used 06 350z springs/shocks! anything else im going to need?

 

rear camber kit probably if you want to align back to sedan specs

 

I would be ok on the shocks/springs for the time being right? what if i dont get an camber kit im on a budget?

 

You will have to use your oem strut caps if they were included. From memory, the Z springs don't lower the car THAT much to require camber correction. But it's about as low as you can go w/o requiring it. So you won't really know 100% until you get it on the rack to see what you camber comes out to.

 

It was right at the limits, but I didn't need it on mine.
& On the front align the toe to .04 max

 

Barely used? how do you know without using a shock dynometer to measure the parameters and testing springs to measure their stiffness. Used is Used.

 

i put in the z shocks and springs...my alignment was in spec even after a year

 

JUM... u dont need the camber kit. u'll be fine

just bring all that **** down to me n mike with some cash and we can install