Tein H-tech OR Tein S-tech
Registered User
Joined: Jun 2005
Posts: 472
Likes: 1
Espresso & surfwb86 do you have pics of your drop? I am interested in htech's for the front and was wondering how much of a drop you guys got and would you say the ride has changed?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
Last edited by Meth68; Oct 4, 2007 at 08:36 PM.
Originally Posted by Espresso
For all those with coupes, the safe route is with 350Z H-techs. The better looking route is going with 350Z S-techs. Both drop the car very similar in the front but with the H-techs, the rear still leaves a gap that the S-tech can eliminate. The issue with using S-techs is you will definitely be required to get a camber kit thus resulting in higher cost overall. I have the H-techs and I'm satisfied for now. If I had the chance though, I'd probably would have gone with the S-techs. A simple solution for me now is doing the spring mount mod and getting a rear camber kit.
Originally Posted by Meth68
Espresso & surfwb86 do you have pics of your drop? I am interested in htech's for the front and was wondering how much of a drop you guys got and would you say the ride has changed?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
+1
Lets see some pics of that drop with the H-techs and how much of a rear gap it has. Thanks!
Originally Posted by Meth68
Espresso & surfwb86 do you have pics of your drop? I am interested in htech's for the front and was wondering how much of a drop you guys got and would you say the ride has changed?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
Is there an option where I wont need any camber adjustments and getting just a 1" drop from just the front end?
redlude, as the Springmount Modder-ator, I have a quick questions for you: 
If someone has 20x10 rear wheels with +30 offsets and 275 series tires, do you think it will be necessary to roll the fenders if you're dropped on 350z Htechs AND do the springmount mod?
I'm planning to do the springmount mod, but don't want to mess around with the springmount mod if its going to lower the rear to the point where I have to roll the fenders. Any advice is much appreciated. thanks man.
If someone has 20x10 rear wheels with +30 offsets and 275 series tires, do you think it will be necessary to roll the fenders if you're dropped on 350z Htechs AND do the springmount mod?
I'm planning to do the springmount mod, but don't want to mess around with the springmount mod if its going to lower the rear to the point where I have to roll the fenders. Any advice is much appreciated. thanks man.
Registered User
Joined: Jun 2005
Posts: 472
Likes: 1
Originally Posted by redlude97
z htechs are ~.8"F G stechs are ~1" Z stechs ~1.2", just install the front springs
TEIN S.Tech Lowering Springs (SKP30-AUB00) Infiniti 03-06 G35 (2dr Coupe, V35) Our Price: $156.40
* Avg Lower: F(1.2"), R(0.9")
* Spring Rate: F(358 lbs), R(274 lbs)
How does that sound price wise? With just going with front springs can i avoid going with a camber kit? Also how will the ride quality be compared to stock? Thanks in advance I appreciate the help
Originally Posted by Meth68
I was looking around and found this..
TEIN S.Tech Lowering Springs (SKP30-AUB00) Infiniti 03-06 G35 (2dr Coupe, V35) Our Price: $156.40
* Avg Lower: F(1.2"), R(0.9")
* Spring Rate: F(358 lbs), R(274 lbs)
How does that sound price wise? With just going with front springs can i avoid going with a camber kit? Also how will the ride quality be compared to stock? Thanks in advance I appreciate the help
TEIN S.Tech Lowering Springs (SKP30-AUB00) Infiniti 03-06 G35 (2dr Coupe, V35) Our Price: $156.40
* Avg Lower: F(1.2"), R(0.9")
* Spring Rate: F(358 lbs), R(274 lbs)
How does that sound price wise? With just going with front springs can i avoid going with a camber kit? Also how will the ride quality be compared to stock? Thanks in advance I appreciate the help
Redlude97 mentioned on this page (the g35 s-techs have super low springrates which will result in poorer handling compared to the 350z h-techs). As far as the price, I think that is a reasonable price for the S-techs new. You may want to consider getting a camber kit for the fronts with that drop.
This thread has a bunch of pictures of the h-techs and s-techs...
https://g35driver.com/forums/picture-share/156253-s-tech-h-tech-people-lets-see-em.html
https://g35driver.com/forums/picture-share/156253-s-tech-h-tech-people-lets-see-em.html
Originally Posted by surfwb86
This thread has a bunch of pictures of the h-techs and s-techs...
https://g35driver.com/forums/showthread.php?t=156253
https://g35driver.com/forums/showthread.php?t=156253
Thanks for all the help. I decide to go with 350z tein H-tech springs. Just got them in this afternoon. Hopefully I will be able to get my alignemnt back to specs.
Registered User
Joined: Nov 2007
Posts: 32
Likes: 0
From: Vancouver BC.
Originally Posted by Granto86
Will 350z htechs be good on my 04 sedan with sport suspension withwitho both stock 17s, and in the near future 19' stern wheels without rubbing?
I would like to know too.
Thanks,
For the people who already have the Zhtechs installed, how long did you guys wait before getting alignment? 1 month? Where did you go to get it done and whats a reasonable cost?