I have searched quite a bit and got a lot of good info. I know a lot of you go with 350Z H Tech which will give about a .5 inch additional drop on the G. I also understand that the Spring Mount mod is recommended as the rear does not drop as much as it should.

My question is this: Do all 350Z springs have this issue where the rear does NOT drop as much as it should? Want to get some 350Z springs as I want to keep as close to my stock spring rates, and only the 350Z springs come this close but I really do not want to do the Sping Mount mod as I would like to revert back to stock later and don't want to have to buy new Spring Mounts.

 

dont be fooled into thinking that you HAVE to cut your springmounts. if you want to, thats fine, but coming from stock, I think youll like the drop just fine. drive it for a couple weeks, and if you still want it lower in the back, cut em up.

 

I have them and I can tell you depending on how much you drive and what kind of driving you do, it can easily take a couple months or more for them to settle.

 

i have these on as well, it's been on for 4 months now and it still seems to be getting lower or maybe i'm just trippin

 

just get the 350z h-techs... ur looking at like a quarter inch drop from stock with the oem 350z springs

 

no, its .8 in front & .7 in back. remember th e extra half inch coming from a 350z

 

Just ordered a set of RS-R Down 350Z springs! Will be a 1.1" F & R drop with .5" added in. I am curious to see what the rear will look like!