]Hey guys,

Pls advise.... much thanks


Can I use 350Z H-tech springs on my '04 G35 coupe?
How come so many people using 350Z H-tech instead G35 H-tech?
If I combine them with D-spec shocks, what will be approx. drop?
Can I ride without having adj. camber?
H-tech w/ D-spec shocks, is it a good match?

Pls advise

Thank you guys

The search button is your friend.

yes you can use them you will be fine. The reason is that the 350z ones are a little stiffer and lower it a tad bit more. i think the drop is .8 front and .5 rear

yes
350z h-techs are slightly lower and have better spring rate, stiffer, etc.
.5-.7" front, .5" rear if i remember approximately
yes, but you should get an alignment 2 wks afterwards anyway
yes

Thanks guys for such great tips!
By the way, do I really need to purchase adj. camber to use 350Z H-tech springs? Some says, this is minimal drop and if I am in the budget, I don't have to use them. Few others informed me that I need to use them, what is my options? Honestly, if the issue is not that serious, I would like to avoid using adj camber. Pls advise.

Thanks in advance

Preston

i'm getting my 350z h-techs installed this weekend without a camber kit, but i bought a rear spc kit and it's ready to go in two weeks when i get my alignment done.

so it's really on an individual basis depending on how much you drive, how much tire wear you personally find acceptable, etc.

if i can get my car into spec then im not gonna put on the camber kit, and since i wont be driving all that much after a month (not gonna be a DD anymore after i start school) i may not put it on at all even if my rears are a bit out of spec.

and as someone already said, search and you'll get all the info you need, this is a very frequently discussed topic. good luck.

What is spc kit? Sorry, I am new to this

Search "SPC"

here's all you need to know:
https://g35driver.com/forums/lounge-off-topic/223904-you-know-you-re-noob.html