350Z H-Tech, Rear Right-Side Slightly Higher
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
350Z H-Tech, Rear Right-Side Slightly Higher
I just installed 350Z H-Tech like 2 days ago. The rear right-side (gas filler side) seem not have lower as much as the left side, probably less than 0.25in. higher. Any thoughts?
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Originally Posted by redlude97
its your decision if it needs to be fixed or not, mine's been like that since I got it in stock form, but noone's ever commented on it because its less than a 1/4"
the weight distribution from left to right is not exactly 50/50, which leads to slightly uneven stance
Trending Topics
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Okay, just filled up a full tank. This time I'm measuring with a measuring tape. The right side is 27.5in from the ground, the left side is 27in. I'm not going further with this, I'm just gonna go with what redlude97 said about weight distribution. From my research, many others experience this too.
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Originally Posted by LightsOut
i noticed the same for my htechs also. but it just the angle and the way the wieght is distributed to each side.
some days it looks lower than normal
some days it looks lower than normal
but then agian u just recently installed the springs, they take about two months to really settle. i have had my springs for about 5 months now, and i think the drop looks good with my stock 19's
Joined: Dec 2007
Posts: 2,078
Likes: 1
From: SoCal - Los Angeles [818]
Originally Posted by LightsOut
but then agian u just recently installed the springs, they take about two months to really settle. i have had my springs for about 5 months now, and i think the drop looks good with my stock 19's
I've had my 350z H-Techs on for about 2 months now, my driver side rear has a bit over a 1 finger gap, my passenger side rear has a 2 finger gap. I hardly ever have a passenger in my car though and I weight about 200lb so I chalk it up to that.
The front may be slightly uneven as well but it's hardly noticeable so I've never really checked.
The front may be slightly uneven as well but it's hardly noticeable so I've never really checked.
it depends some days my drop feels like the left side is higher, about pinky finger size higher.
then some days it looks about even.
in the end drop looks good, now that the springs have fully settled. i have about to finger gap ( with the lines on our knuckles going N and S)
then some days it looks about even.
in the end drop looks good, now that the springs have fully settled. i have about to finger gap ( with the lines on our knuckles going N and S)



