i have 19's

8.5 in the front and 10 in the back. with the s techs installed will there be any rubbing issues? thanks


nick

 

anyone

 

anything wider then a 275 will rub with lower than a 22 offset.

 

mine are 275 i think. i know there not 275 in the front forsure.

thanks man. also it snows here. and the g is already pretty low...will i have any probs? i dont have a lip.

 

do i need to buy a camber kit when i install my spring?

 

a rear camber kit would be smart

 

Hockey, rubbing will depend on your offsets. As stated above, running lower than a 22 offset with a 285 tire, you will need to have your fenders rolled. I have +23 offset with 285 BFG KDWs in the back and I had to roll my fenders 100% when I dropped my car.

As for camber, people argue on here that the rear is always a must since it's so cheap. With S techs your front will be out of spec, which would require a front camber kit (upper A arms) to bring back into spec. There are arguments both ways on whether or not the front kit is worth it. IMO, I do everything "right" the first time, and I got the front A arms. I'm also dropped more than S techs, but if you don't mind going through front tires a bit faster, then it's not needed.