JIC Magic Coilover question
#1
Join Date: Aug 2007
Location: Houston, TX
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
JIC Magic Coilover question
I just installed some Flt-tar and discovered they were pretty stiff. I did some research and found out i can buy some helper springs to help the stiffness. i was wondering if anyone else has this set up.
http://www.evasivemotorsports.com/Me..._HELPER_SPRING
i was also wondering whats the difference between
I.D. - Height (mm) 62mm - 50mm
Spring Rate 1.6kg/mm
I.D. - Height (mm) 62mm - 80mm
Spring Rate 2.1kg/mm
Which one would be better to improve ride quality?
ONE LAST THING.. adjustable endlinks should fix the problem to the rattle/creeking noise in the rear?
THANKS IN ADVANCE!!
http://www.evasivemotorsports.com/Me..._HELPER_SPRING
i was also wondering whats the difference between
I.D. - Height (mm) 62mm - 50mm
Spring Rate 1.6kg/mm
I.D. - Height (mm) 62mm - 80mm
Spring Rate 2.1kg/mm
Which one would be better to improve ride quality?
ONE LAST THING.. adjustable endlinks should fix the problem to the rattle/creeking noise in the rear?
THANKS IN ADVANCE!!
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM